are those the same thing? or do i have to purchase both for my turbo setup?

 

the feed line feeds the turbo and the return line sends it back to the oil pan. contact flamenco-t, he sells a kit. ask anyone on ht about him...i'm sure you'll get the same response from everyone. he is an awesome seller.

 

Yeah Stan (Flamenco-t) is the man.

 

sorry guys dont want to make my own thread so...where do you stick the return line and feed line??? im a noob at this so dont flame me...no experience with turbos what so ever

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sohc_civic &raquo;</TD></TR><TR><TD CLASS="quote">sorry guys dont want to make my own thread so...where do you stick the return line and feed line??? im a noob at this so dont flame me...no experience with turbos what so ever</TD></TR></TABLE>

Feed line comes from the back of the block where the stock oil pressure sensor goes, oil return line goes into the oil pan.

 

both these lines have a place to go into the turbo rite?

 

Yes, oil feed goes into the top of the CHRA [aka center section] and oil return comes out of the bottom of the CHRA. Some turbos also have a water cooled CHRA, and have an additional in and out port on the CHRA for this. If your turbo does, it does not matter which you use for the water in or out, or you can block off the water section and use oil only.

 

aight cools...thanx dude very helpful

 

yes you have to get both. check my sig. cheap...

and normally you have to get the oil return flange. its only about 10 $ extra though.