Iam in the process of installing my wideband.it says to put a 1k ohm resistor inbetween the 02sensor heater power and the 02 heater ground so that it doesnt kick an 02 heater code. I cant seem to find which pins they are from the ECU . can anyone help?

 

bump

 

bump? someones gotta know.

 

I dont understand what exactly you are looking for. I dont think I installed anything like this with my WB. Ive got the pin outs sitting right in front of me so let me know which one u want. Im only gonna be here for another 5min though so you better get back to me quick

 

i need the pinout numbers on the ecu for the 02 heater power and 02 heater ground.
its to trick the ecu to think the heater is still functional.

 

The exact ones you mentioned arent listed in this AEM EMS diagram. Heres all the O2 sensor and power pin outs I can see in this particular diagram:

A8 = Secondary O2 heater control
A23= Secondary O2 sensor
C1= Primary O2 heater control
C16= Primary O2 sensor
C7= Sensor ground 1 (D12 available also)
C18= Sensor ground 2 (D16 available also)
B1= Power Source 1
B2= Power Ground 1
B9= Power Source 2
B10= Power Ground 2

 

hmmmmm maybe its C1 and C7. ill mess with it later this week and see what happens . thanks for the pinouts.