mods:
aem cai
home-made jdm dc wannabe with 2.5" collector
2.5" test pipe
2.5" T1R b-pipe w/ spoon axle back
VAFC
chipped p28 from IH8RICERZ

i havent been able to get to the dyno yet to tune it so i dont have any hp numbers. but i know that is is running very rich because the back of my car is no longer CW

60'--- 2.35
1/8--- 9.261
mph-- 80.17
1/4--- 14.240
mph-- 96.5

i know i need to work on the 60's but i just cant get the damn thing to launch right. im pretty sure that 13's are capable. i only got to run 2 times tonite and my other run was a 14.5@ 97mph. my previous track attempt with only intake left me with only a 14.7 @ 94 so i am satisfied that with the mods i added. i picked up a good amount of time and 3mph

enjoy
-chris

 

What exactly have you done with the header?

 

here is a link to my posts i had a while ago its got pictures of what i did

this one is pics of how i got the header
https://honda-tech.com/zerothread?id=644788

and here is pics of when i finished it
https://honda-tech.com/zerothread?id=659201

--chris

 

very impressive times! especially if you went to Bowling Green I wasnt too impressed with tthe track last season.

 

Nice times, it's all due to the exhaust

 

your midrange must be pretty to run 14.2 with a 2.3 60'

 

yea i need to get this bitch on the dyno and see what its got! it feels good in the midrange for sure. i was mainly surprised by the 9.2 @ 80 in the 1/8th (or is that normal?) cus my last time at the track i only managed a 9.5 @ 75 with a 14.7

edit: and chris...... it was TOTALLY the exhaust

 

Very good times, nice trap speeds as well.

 

yeah, that 60' can definitely go down and then your E.T. should go down by a good amount. Nice time though...

 

What tires are you using? Get that 60' down and you may be able to break into the 13's.

 

im using ES100's for tires in the stock size

 

ok im confused, i keep reading these drag strip times, and the mods that these people have and you guys are saying that they are good times for the mods they have, but heres why im confused, earlier this year at capitol raceway i ran a 14.2 @98.9 mph with a 2.2 60ft then a 14.3 @99.2 mph with the same 60ft and the only mod i had was a aem cold air intake, i think i might have had the back seats out but that doesnt make any difference, so is my motor above average or am i a good driver or what, and my mph seems really high for a stock R also

 

yea those mph are pretty high for a stock R...... stock i was only pulling like 94mph in the 1/4