Well just got the car back from http://www.auto-logic.biz/ i must say there some super nice guys over there Brad and Jason were great with everything and they both were great with customer service. But here's the dyno graph it doesnt lie. Thats right your reading right 311.7 whp and 208.4 torque.




The setup is
JDM B16a stock
inline pro mani
Precision sc61
Precision 780cc injectors
Precision 600 HP intercooler
Tial 38mm wastegate
hondata intake gasket
hondata s200
Gm 3 bar map sensor
custom autologic 3 inch down pipe
custom 2.5 inch intercooler piping
greddyblow off valve

 

nice numbers. brad and jason are awesome

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostin Ex &raquo;</TD></TR><TR><TD CLASS="quote">Well just got the car back from http://www.auto-logic.biz/ i must say there some super nice guys over there Brad and Jason were great with everything and they both were great with customer service. But here's the dyno graph it doesnt lie. Thats right your reading right 311.7 whp and 208.4 torque.




The setup is
JDM B16a stock
inline pro mani
Precision sc61
Precision 780cc injectors
Precision 600 HP intercooler
Tial 38mm wastegate
hondata intake gasket
hondata s200
Gm 3 bar map sensor
custom autologic 3 inch down pipe
custom 2.5 inch intercooler piping
greddyblow off valve
</TD></TR></TABLE>

mmmmm 300 fwhp

 

Awesome stock block number setups are coming out of the woodwork Very nice

 

Nice numbers, any times yet?

 

Thanks i havent had any times yet i just got her back on Sunday but they will come.

 

Congrats on your #'s

How much boost?

 

It was done at 15psi with really conservitve timing i could have made a lot more power at that level but you had to be easy one the stock motor.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vietjdmboi &raquo;</TD></TR><TR><TD CLASS="quote">nice numbers. brad and jason are awesome</TD></TR></TABLE>

indeed.

nice numbers man

 

nice #s...

 

great numbers

 

Hey what year is the motor? What gen I should say..

 

thats nutty man! I woulda never though that possible.

 

Nice numbers man! I am tuning my b16 in 2 weeks with a similar setup...hope to see similar results!

 

I rode in this car today and it pulls nicely. They did a really good job tuning it.

 

only difference between his setup and mine is my turbo is the gt35e and 880 injectors....that's it....

any pics of the car???????

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DIY Turbo &raquo;</TD></TR><TR><TD CLASS="quote">

Im glad you are putting those injectors, intercooler, and that turbo to good use

Not bad numbers but could have been done on your average .63 T3/t4, 450's, and a 2" thick FMIC.

to buying into the hype 110%

btw, i always like looking at b16's numbers and looking at the tq and having a lil chuckle

and yes, i know im a *****</TD></TR></TABLE>

im glad youre putting your brain and knowledge to good use also

 

cool

 

nice numbers on a stock block.
curious to see what that setups gonna do if u build the motor.

 

We should see what this setup gona do on a built motor here in about 3 months or so you guys didnt think i went with that big turbo for nothing did ya Oh yeah the built motor im throwin in there will be a sleeved B18c.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -iLLuZioN-B18C1 &raquo;</TD></TR><TR><TD CLASS="quote">

im glad youre putting your brain and knowledge to good use also </TD></TR></TABLE>&lt;--WTF all i gota say is *******!!!!! By the way what do you drive that's so great.

 

300hp b16 is fun......... but 15psi??? on a sc61?? wtf

we made that power on 8psi with basicly the same setup.. sc61 and a stock block... and made power to 9500 rpms

 

great #'s

do u still have AC and PS?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDogg &raquo;</TD></TR><TR><TD CLASS="quote">300hp b16 is fun......... but 15psi??? on a sc61?? wtf

we made that power on 8psi with basicly the same setup.. sc61 and a stock block... and made power to 9500 rpms </TD></TR></TABLE>

Im guessing timing is very conservative...even still though im running super conservative timing and made the same power with less boost/smaller turbo.

Regardless nice numbers how is spool ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDogg &raquo;</TD></TR><TR><TD CLASS="quote">300hp b16 is fun......... but 15psi??? on a sc61?? wtf

we made that power on 8psi with basicly the same setup.. sc61 and a stock block... and made power to 9500 rpms </TD></TR></TABLE>
I was thinking the same thing.Whats up wit that?

 

Nice WHP #'s but damn them b16s's dont make **** for torque