New st00pid tuned b16
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Location: La, Us
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
New st00pid tuned b16
Well just got the car back from http://www.auto-logic.biz/ i must say there some super nice guys over there Brad and Jason were great with everything and they both were great with customer service. But here's the dyno graph it doesnt lie. Thats right your reading right 311.7 whp and 208.4 torque.
The setup is
JDM B16a stock
inline pro mani
Precision sc61
Precision 780cc injectors
Precision 600 HP intercooler
Tial 38mm wastegate
hondata intake gasket
hondata s200
Gm 3 bar map sensor
custom autologic 3 inch down pipe
custom 2.5 inch intercooler piping
greddyblow off valve
The setup is
JDM B16a stock
inline pro mani
Precision sc61
Precision 780cc injectors
Precision 600 HP intercooler
Tial 38mm wastegate
hondata intake gasket
hondata s200
Gm 3 bar map sensor
custom autologic 3 inch down pipe
custom 2.5 inch intercooler piping
greddyblow off valve
#3
New User
Join Date: Aug 2001
Location: Cypress, CA, USA
Posts: 1,452
Likes: 0
Received 0 Likes
on
0 Posts
Re: New st00pid tuned b16 (Boostin Ex)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Boostin Ex »</TD></TR><TR><TD CLASS="quote">Well just got the car back from http://www.auto-logic.biz/ i must say there some super nice guys over there Brad and Jason were great with everything and they both were great with customer service. But here's the dyno graph it doesnt lie. Thats right your reading right 311.7 whp and 208.4 torque.
The setup is
JDM B16a stock
inline pro mani
Precision sc61
Precision 780cc injectors
Precision 600 HP intercooler
Tial 38mm wastegate
hondata intake gasket
hondata s200
Gm 3 bar map sensor
custom autologic 3 inch down pipe
custom 2.5 inch intercooler piping
greddyblow off valve
</TD></TR></TABLE>
mmmmm 300 fwhp
The setup is
JDM B16a stock
inline pro mani
Precision sc61
Precision 780cc injectors
Precision 600 HP intercooler
Tial 38mm wastegate
hondata intake gasket
hondata s200
Gm 3 bar map sensor
custom autologic 3 inch down pipe
custom 2.5 inch intercooler piping
greddyblow off valve
</TD></TR></TABLE>
mmmmm 300 fwhp
Trending Topics
#8
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Location: La, Us
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Re: New st00pid tuned b16 (quikB18B)
It was done at 15psi with really conservitve timing i could have made a lot more power at that level but you had to be easy one the stock motor.
#9
Honda-Tech Member
Join Date: Jan 2002
Location: Chandler., Arizona
Posts: 9,684
Likes: 0
Received 0 Likes
on
0 Posts
Re: (vietjdmboi)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by vietjdmboi »</TD></TR><TR><TD CLASS="quote">nice numbers. brad and jason are awesome</TD></TR></TABLE>
indeed.
nice numbers man
indeed.
nice numbers man
#17
Re: New st00pid tuned b16 (DIY Turbo)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DIY Turbo »</TD></TR><TR><TD CLASS="quote">
Im glad you are putting those injectors, intercooler, and that turbo to good use
Not bad numbers but could have been done on your average .63 T3/t4, 450's, and a 2" thick FMIC.
to buying into the hype 110%
btw, i always like looking at b16's numbers and looking at the tq and having a lil chuckle
and yes, i know im a *****</TD></TR></TABLE>
im glad youre putting your brain and knowledge to good use also
Im glad you are putting those injectors, intercooler, and that turbo to good use
Not bad numbers but could have been done on your average .63 T3/t4, 450's, and a 2" thick FMIC.
to buying into the hype 110%
btw, i always like looking at b16's numbers and looking at the tq and having a lil chuckle
and yes, i know im a *****</TD></TR></TABLE>
im glad youre putting your brain and knowledge to good use also
#20
Honda-Tech Member
Thread Starter
Join Date: Nov 2002
Location: La, Us
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Re: New st00pid tuned b16 (reaction360)
We should see what this setup gona do on a built motor here in about 3 months or so you guys didnt think i went with that big turbo for nothing did ya Oh yeah the built motor im throwin in there will be a sleeved B18c.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -iLLuZioN-B18C1 »</TD></TR><TR><TD CLASS="quote">
im glad youre putting your brain and knowledge to good use also </TD></TR></TABLE><--WTF all i gota say is *******!!!!! By the way what do you drive that's so great.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -iLLuZioN-B18C1 »</TD></TR><TR><TD CLASS="quote">
im glad youre putting your brain and knowledge to good use also </TD></TR></TABLE><--WTF all i gota say is *******!!!!! By the way what do you drive that's so great.
#21
Honda-Tech Member
Re: New st00pid tuned b16 (Boostin Ex)
300hp b16 is fun......... but 15psi??? on a sc61?? wtf
we made that power on 8psi with basicly the same setup.. sc61 and a stock block... and made power to 9500 rpms
we made that power on 8psi with basicly the same setup.. sc61 and a stock block... and made power to 9500 rpms
#23
Guest
Posts: n/a
Re: New st00pid tuned b16 (JDogg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDogg »</TD></TR><TR><TD CLASS="quote">300hp b16 is fun......... but 15psi??? on a sc61?? wtf
we made that power on 8psi with basicly the same setup.. sc61 and a stock block... and made power to 9500 rpms </TD></TR></TABLE>
Im guessing timing is very conservative...even still though im running super conservative timing and made the same power with less boost/smaller turbo.
Regardless nice numbers how is spool ?
we made that power on 8psi with basicly the same setup.. sc61 and a stock block... and made power to 9500 rpms </TD></TR></TABLE>
Im guessing timing is very conservative...even still though im running super conservative timing and made the same power with less boost/smaller turbo.
Regardless nice numbers how is spool ?
#24
Honda-Tech Member
Join Date: Sep 2002
Location: Louisiana
Posts: 1,904
Likes: 0
Received 0 Likes
on
0 Posts
Re: New st00pid tuned b16 (JDogg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDogg »</TD></TR><TR><TD CLASS="quote">300hp b16 is fun......... but 15psi??? on a sc61?? wtf
we made that power on 8psi with basicly the same setup.. sc61 and a stock block... and made power to 9500 rpms </TD></TR></TABLE>
I was thinking the same thing.Whats up wit that?
we made that power on 8psi with basicly the same setup.. sc61 and a stock block... and made power to 9500 rpms </TD></TR></TABLE>
I was thinking the same thing.Whats up wit that?