well i went to the track last night and only got 2 runs and i had a major problem. on the 2nd pass about 75ft from the line my crank pulley flew out at 130mph and shortly after that the timing belt followed! but anyway i ran 11.6@130 and 11.3@126. lucky there was no major damage and its back running today! thank god!

heres my setup for those u want to know. its a 85mm dart block, cp pistons, crower rods, prodrive oil pump gear, moroso oilpan, everything was balanced and ble printed, arp headstuds, cometic headgasket, port and polished b16 head, stainless vavles, dual valvesprings, titainun retainers, jg intake manifold, sfp race manifold, t-66, custom piping, percision intercooler, gozilla bov, aeromotive fuel regulator, all stainless fuel lines frm front to back, walbor fuel that is maxed out and im about to upgrade, and im sure im missing some things. but any way thats most of it.


Modified by b18cya94 at 3:19 PM 3/7/2004

 

wow ....
whats your set up?

good times ( i guess, i've never heard of a 500 whp civic hah)

 

i lock tited the bolt and tighten the **** out of it so its not coming back off now!

 

here u go! this is it! https://honda-tech.com/zerothread?id=787839

 

You really need to use a new bolt for the crank pulley. It's a one time use piece.

Mine backed out twice after I reused it. For the $15 or so it costs from the dealer, it's cheap insurance. (But still an expensive bolt. )

 

i have never had the problem before on any of the engines i built i just didnt get it tight enough that time but i leaned a good lesson and it wont every happen again!

 

but oh well **** happens thats the name of the game!

 

is the hatch full interior?

 

yep it has all the interior!

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18cya94 &raquo;</TD></TR><TR><TD CLASS="quote">yep it has all the interior!</TD></TR></TABLE>

Slicks?

 

yep 13in lensos with 25in mt!

 

what were you 60' times on those two runs?

 

Nice! How much $$ have you poured into it?

 

i thinkg u can hit 10s keep it up buddy...

 

it went 1.8 and 1.7 60's

 

nice traps!

 

That is badass

 

with stock axles ???

 

no they are driveshaft shop stage 3 axles.

 

they have been good so far.

 

What does the car weigh? Awesome times for only two passes.

 

2250

 

im about to get the new suspension and a couple of other little **** and it should ride out then!

 

I think you're good for 10's but nice times regardless..

 

yep it should go prety easy just need a couple more passes then it will be good