times on 500whp civic!
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Georgia
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
times on 500whp civic!
well i went to the track last night and only got 2 runs and i had a major problem. on the 2nd pass about 75ft from the line my crank pulley flew out at 130mph and shortly after that the timing belt followed! but anyway i ran 11.6@130 and 11.3@126. lucky there was no major damage and its back running today! thank god!
heres my setup for those u want to know. its a 85mm dart block, cp pistons, crower rods, prodrive oil pump gear, moroso oilpan, everything was balanced and ble printed, arp headstuds, cometic headgasket, port and polished b16 head, stainless vavles, dual valvesprings, titainun retainers, jg intake manifold, sfp race manifold, t-66, custom piping, percision intercooler, gozilla bov, aeromotive fuel regulator, all stainless fuel lines frm front to back, walbor fuel that is maxed out and im about to upgrade, and im sure im missing some things. but any way thats most of it.
Modified by b18cya94 at 3:19 PM 3/7/2004
heres my setup for those u want to know. its a 85mm dart block, cp pistons, crower rods, prodrive oil pump gear, moroso oilpan, everything was balanced and ble printed, arp headstuds, cometic headgasket, port and polished b16 head, stainless vavles, dual valvesprings, titainun retainers, jg intake manifold, sfp race manifold, t-66, custom piping, percision intercooler, gozilla bov, aeromotive fuel regulator, all stainless fuel lines frm front to back, walbor fuel that is maxed out and im about to upgrade, and im sure im missing some things. but any way thats most of it.
Modified by b18cya94 at 3:19 PM 3/7/2004
#4
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Georgia
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Re: times on 500whp civic! (b18cya94)
here u go! this is it! https://honda-tech.com/zerothread?id=787839
#5
Junior Member
Join Date: Jan 2004
Location: Not in the United Kingdom.
Posts: 645
Likes: 0
Received 0 Likes
on
0 Posts
Re: times on 500whp civic! (b18cya94)
You really need to use a new bolt for the crank pulley. It's a one time use piece.
Mine backed out twice after I reused it. For the $15 or so it costs from the dealer, it's cheap insurance. (But still an expensive bolt. )
Mine backed out twice after I reused it. For the $15 or so it costs from the dealer, it's cheap insurance. (But still an expensive bolt. )
#6
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Sep 2002
Location: Georgia
Posts: 587
Likes: 0
Received 0 Likes
on
0 Posts
Re: times on 500whp civic! (MadCow)
i have never had the problem before on any of the engines i built i just didnt get it tight enough that time but i leaned a good lesson and it wont every happen again!
Trending Topics
#10
Honda-Tech Member
Join Date: May 2002
Location: Illanoise, USA
Posts: 3,448
Likes: 0
Received 0 Likes
on
0 Posts
Re: times on 500whp civic! (b18cya94)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by b18cya94 »</TD></TR><TR><TD CLASS="quote">yep it has all the interior!</TD></TR></TABLE>
Slicks?
Slicks?