What is the stock valve gap of the itr engine? Intake and exhaust. Anybody has a link to the procedure?

Thanks

 

https://honda-tech.com/zerothread?id=550113

http://www.c-speedracing.com/h...t.php

 

c-speedracing.com

 

It's in the hood.

 

That's if the engine is still in a type-R body, which is not the case

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by .RJ &raquo;</TD></TR><TR><TD CLASS="quote">c-speedracing.com</TD></TR></TABLE>


LOL-- thats funny RJ-- your reply in this thread is the same as the H-T link i posted above!

good 'ol c-speed

 

ok i was reading some peple say to do it when the engine is cold and others say to do it when the engine is warm because the reading is true because it will shrink and expand...do it when the engine is cold right?

 

You have to do it when everything is cold.

 

know i read that somepeople do it between the cam lobe and rocker arm pad and others between the valve spring retainer and adjusting nut now which is the right way to do this?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ITR.#1446 &raquo;</TD></TR><TR><TD CLASS="quote">know i read that somepeople do it between the cam lobe and rocker arm pad and others between the valve spring retainer and adjusting nut now which is the right way to do this?</TD></TR></TABLE>

Different motors have different procedures.

Follow the links already posted.