My oil return line sometimes touches the downpipe. Does anybody know if there is some material that I could wrap around it. It's around 1 ft long. I know the drag kit comes with some shiny metal wrap. Where can i get those. thanks.

 

http://www.summitracing.com, um im not sure what the stuff is called but im sure you could search on there and find it. ill look too

type heat wrap into the search area

 

Taylor fire sleeve (comes in orange and silver) is your best bet. You will need to move the drain line off of the DP though, if it is actually touching it your screwed with heat sleeve or without it.

 

This is what your looking for
NOTE: 1600x1200 pic
http://www.scrapinsi.com/photo...7.jpg

Made by Earls... My buddy gave it to me... Careful though... Its bigger than the oil return line, and made me not realize that my oil return line had a small kink in it.

 

Yea, the Earls Flame Guard or whatever you call it is great. I have it also on my oil return line. You can get it in different diameters but the only one that will fit a -0an oil line is the 1 1/4 one. Maybe the one inch would do it but may be tight.

 

Taylor Vertex fire sleeve


Earls flame guard just looks like re-labled Taylor fire sleeve. I'd buy which ever was cheaper, they are probably the exact same material. Good luck

 

I use this Thermo-Sleeve it works good.

http://www.alamomotorsports.co....html