Need the driver and passenger harnesses from a JDM Integra with power folding mirrors. Hit me up

 

up

 

up for the day

 

Have a set of uncut harness off a '97 JDM Sir-G (GSR), how much are you willing to spend?

Thanks,
Jay

 

Don't really know what they are worth. I do need them to complete this project. THey need to have the plugs and everything for the power windows and folding mirrors.

 

Yes, I know you need all the plugs and such. I do have both sides that are uncut w/ all plug intact. When you do install the harness, you know you need the mirror relay for the folding mirrors.

-Jay

 

Is that at the fusebox or in the door? I have a complete front clip that includes the dash and wiring so I may have all of that.

 

I noticed something else today too. The USDM driver's side window motor has a four-pin plug, and the USDM passengers side has a two-pin harness. The four pin is obviously for the auto up and down. That does'nt really matter to me, but the harness won't be right, so I may need the motors from the doors too.

 

That's a door lock relay box. You really don't need the front clip of the harness relay and such. All you have to do is tap (solder-in) the wires from the relay and remap it to the switch. I think I have a diagram somewhere on my computer downstairs about the wiring on jdm folding mirrors.

As for the second question, you do not need those wires. All the wires you're looking for is just plug-in play and just wires needs to be tapped. This is a very simple installation mod to do. However, it may be a problem with you auto window switch though, since the jdm is reversed; windows still goes down anyways.

Thanks,
Jay

 

So how much do you want for them?

 

It's complete harness, uncut. $50 shipped for both sides?

-Jay

 

I'll do that. How do you want the payment? Paypal is good for me

 

Please check your PM.