On the Greddy kit there is two straight unions for the oil feed one is bigger and that is for the line off the turbo and that goes only one way so I found out, then there is a smaller one that goes were the oil sending unit was to the brass tee my question is can you put that in backwards cause if you tighten it one way it looks like it goes in a little more than the other..Kits going on tomorow so I wanna make shure I got everything right before I start...Thanks




Modified by 95excoupe at 5:06 AM 2/10/2004

 

Here's a pic so people actually click on this...its the union on the bottom and sorry if this is a stupid question but it looks like one end is a little different..