who makes an 3inch short ram intake that will fit a GSR T/B

 

Just buy a 3 inch intake and get a silicone adapter hose, or a good hose clamp.

 

Do you still have the GS-R IM also? I have a Weapon-R shortam that is 3". The only other intake I know that is 3" Mr. Gasket.

If you have a Skunk2 IM, then most ITR intakes will be 3".

 

go on to JC Whitney or any of those bulk discounters and buy a u-bend piece of pipe...then just cut to fit.

no point going 3" with a shortram unless your motor is built....you'll lose torque.

 

I had a 3" short ram intake and then changed to a 2.75" CAI, i took the cold air section of for the winter and ran it as a short ram, and it felt way stronger than it did with the 3" intake. the car seemed to bog at low revs as i suspect it wasnt able to pull the air in fast enough thru the 3" pipe.

 

so would the AEM ITR CAI connect to a Skunk2 IM wit GSR throttle body?