Its going on a B18C5 motor but my question is how does it install in conjuction with the factory oil cooler?

 

Our oil adapter sandwich plate will instal;l on the back of the oil coolers just like the filter would. Then the filter would attach to the oil sandwich plate. Pretty straight forward and very easy to do. If you have any more questions concerning our products, please let me know anytime
Golden Eagle Mfg.

 

anybody know how tight the sandwich adapter should be torqued down to???

 

40-45 ft/lbs ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by X-Mazda 3 Racer &raquo;</TD></TR><TR><TD CLASS="quote">Our oil adapter sandwich plate will instal;l on the back of the oil coolers just like the filter would. Then the filter would attach to the oil sandwich plate. Pretty straight forward and very easy to do. If you have any more questions concerning our products, please let me know anytime
Golden Eagle Mfg. </TD></TR></TABLE>

how come some folks have had problems with the g.e. adapter going bad., as in leaking ,is it just normal wear and tear and the o ring just tends to go bad?

 

i dunno... i'll post if mine leaks when i do the install later this week...

 

here's my write-up:

https://honda-tech.com/zero...81009

 

used my for over a 1yr no leaks, make sure u put oil on the rubber ring of the sandwhich and don't over tighten

 

mine is leaking from the sandwhich adapter is there anyway to fix this problem

 

Honda Bond.