my driver side actuator is bad so i brought a 2 wire hook up acutator off ebay, can anyone tell me how to remove the old actuator and put in the new one. thz.

please be as specific as possible. Thz

 

disregard this post, i figured it out.

 

Whoah, not yet.

Are you talking about the lock actuators? Where are they even located?

(I'm having trouble with my locks, may be looking at swapping my actuators out when it warms up a little).

 

are you having problems with the door locks themselves or like the door handle opening inside or what?

 

The locks themselves. I've got a '99 LX sedan, both of my front doors have to be unlocked with a key, the back doors still unlock with my remote entry (the key fob), as well as the switch on the front doors. The front locks get juice (you can hear them trying to open and see them jiggle), but not enough to actually open them. The problem started on the driver's side and got progressively worse, then the passenger side.

I've talked more about it in the door lock problem thread:
https://honda-tech.com/zerothread?id=739420

where the solution sounded like checking out the actuator. It's friggin cold outside right now (0º F), I won't be working on this till March or April, but was wondering where the actuators were.