fs: bulit b18c1 for turbo 793miles
Thread Starter
Junior Member
Joined: Sep 2002
Posts: 854
Likes: 0
From: westerville, ohio, usa
fs: bulit b18c1 for turbo 793miles
I'm going to go a different route with my Civic.
So I've must part with my built for turbo engine. It came out of my 94 GSR, and has 793 miles since the rebuild. The piston rings where seating nicely and never seen boost.
Specs:
Ported & polished head, Type R springs & retainers, 5 angle valve job, new valve guides, new valve seals, new NGK platinum plugs, new NGK plug wires, JG Edelbrock 65mm throttle body, JG Edelbrock Victor-X intake manifold. The block has been bored and honed thirty thousands and has a Nuformz block guard, CP pistons (9:1 compression ratio), Eagle H-beam rods, all new bearings, new water pump, new timing belt, new Type R oil pump, all new gaskets, and a copper plated head gasket. The transmission has all new gears, new syncros, new rods, and a Clutch Masters flywheel.
Everything has a pampered 793 miles on it.
It was removed when the car was totaled out. (motor was untouched)
I have all records and recepts.
Looking to get $4500 (OBO)
I also have all the motor mounts, throttle cable.
I will throw in a brand new Thermal R&D 3" turbo catback for and extra $250, ($500 new) and have a stock exhaust manifold and some misc. items.
I don't have the CV axles or ECU.
Please reply or PM with questions.
Thank you. jay
So I've must part with my built for turbo engine. It came out of my 94 GSR, and has 793 miles since the rebuild. The piston rings where seating nicely and never seen boost.
Specs:
Ported & polished head, Type R springs & retainers, 5 angle valve job, new valve guides, new valve seals, new NGK platinum plugs, new NGK plug wires, JG Edelbrock 65mm throttle body, JG Edelbrock Victor-X intake manifold. The block has been bored and honed thirty thousands and has a Nuformz block guard, CP pistons (9:1 compression ratio), Eagle H-beam rods, all new bearings, new water pump, new timing belt, new Type R oil pump, all new gaskets, and a copper plated head gasket. The transmission has all new gears, new syncros, new rods, and a Clutch Masters flywheel.
Everything has a pampered 793 miles on it.
It was removed when the car was totaled out. (motor was untouched)
I have all records and recepts.
Looking to get $4500 (OBO)
I also have all the motor mounts, throttle cable.
I will throw in a brand new Thermal R&D 3" turbo catback for and extra $250, ($500 new) and have a stock exhaust manifold and some misc. items.
I don't have the CV axles or ECU.
Please reply or PM with questions.
Thank you. jay
Honda-Tech Member
Joined: Sep 2002
Posts: 2,865
Likes: 1
From: Wooster, Ohio, usa
Re: fs: bulit b18c1 for turbo 793miles (JBONES)
im interested in the thermal 3" exhaust.
let me know. if u want to part with it. bump for a nice motor. whish i had the cash to pick it up.
let me know. if u want to part with it. bump for a nice motor. whish i had the cash to pick it up.
Thread Starter
Junior Member
Joined: Sep 2002
Posts: 854
Likes: 0
From: westerville, ohio, usa
Re: fs: bulit b18c1 for turbo 793miles (JBONES)
how about this...
one of you'al buy the whole thing for $4500 and you part the motor out!!!!!
i dont think i ever said i wanted to part the whole thing out in pieces!!!!!
paypal, moneyorder, or cash....................
one of you'al buy the whole thing for $4500 and you part the motor out!!!!!
i dont think i ever said i wanted to part the whole thing out in pieces!!!!!
paypal, moneyorder, or cash....................
Trending Topics
Thread Starter
Junior Member
Joined: Sep 2002
Posts: 854
Likes: 0
From: westerville, ohio, usa
Re: (boosted_dc2)
hey landon,
"good luck with the sale"
what are you trying to say!!!!!!
couple questions for ya landon!
1. how much are you going to buy a complete gsr swap for around here?
a: in the 3k-3.5k range
2. where are you going to find one with all the extras?
let me know man, i dont know if your trying to hate on me or what......
"good luck with the sale"
what are you trying to say!!!!!!
couple questions for ya landon!
1. how much are you going to buy a complete gsr swap for around here?
a: in the 3k-3.5k range
2. where are you going to find one with all the extras?
let me know man, i dont know if your trying to hate on me or what......
Thread
Thread Starter
Forum
Replies
Last Post
94lsboost
Vehicles for sale
7
Mar 23, 2005 07:47 AM
94lsboost
Forced Induction
14
Nov 24, 2004 12:46 PM
94BlackRS
Vehicles for sale
31
Apr 10, 2004 01:39 PM