who has the most powerfull "D"????

or who is running the fastest???

 

I my d16z6

 

on this board? i'd have to say zex man, then brian (turbodcx) for the street cars

 

Am I the fastest street D16 ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Civic TSI &raquo;</TD></TR><TR><TD CLASS="quote">Am I the fastest street D16 ?</TD></TR></TABLE>

At 11.68 right now you might be. There are a couple others on this board in the process of building one that may beat that though.

 

oh yah i actually forgot about you meng hehehe. well he did say most powerful... what did u dyno at? i know brian dynoed mid 300's

 

He also said the fastest But did he met quickest ?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">There are a couple others on this board in the process of building one that may beat that though</TD></TR></TABLE>
I'm working on that too

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Civic TSI &raquo;</TD></TR><TR><TD CLASS="quote">
I'm working on that too </TD></TR></TABLE>

Sweet. I myself am starting to piece a street turbo setup together (not going to be the fastest though). I'm trying to decide between a Garrett T3/T4 50 trim and Precision SC50. The goals are 300-350whp. Stock sleeves, SRP pistons and Eagle rods.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Civic TSI &raquo;</TD></TR><TR><TD CLASS="quote">Boosted D16
11.68 @ 117.33mph, running out of gas in 4th
</TD></TR></TABLE>

Do you run out of gas becuase you only have a little bit of gas or is that at a full tank.....that would suck if you had to run your car like that

 

Jason Whitefield old school non vtec D series. I don't know if any one beat his record or not.

 

ill be there soon . the building process of the monster is in very early stages...can you say bored 20 over and stroked 20 over

 

the fastest d series turbo car on honda-tech that i know of is matt patrick(zexman). 10.85 @ 135. street car in street trim. no wheelie bars.



bisi is on here sometimes and he ran 10's with a d series all motor. in a pro car.

 

well this is cool


RIANCIVIC wants to push 300+ hp on stock sleeves and forged internals WOW im not the only one that wants to do that. Now it this possible

my plans are forged pistons+rods no more than .030 over (stock if posible) now i now that the power is in ur head not ur block so there for im going to do a stage 3 prt and polish first. when i get more money, valves alone with a 3 angle valve job then camshaft.

NOW can some of u guys with experiance with the sohc tell me beside a turbo whate else i need and how can i start to build power, knowing that i alreaddy have a turbo kit instaled

NOW IS IT REALY POSSIBLE TO PUSH CLOSE TO 300 HP ON STOCK SLEVES IF SO i will be even a more proud of my sohc than if i would of done a swap

sorry if this does not make a lot of sence

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote"> can you say bored 20 over</TD></TR></TABLE>

yes

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM &raquo;</TD></TR><TR><TD CLASS="quote">and stroked 20 over</TD></TR></TABLE>

huh? How do you stroke a motor 20 over? Do you mean increase the stroke .020?

Im not quite understanding what you meant

 

ya my bad i didnt think i needed to clarify hehehh

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zigzag765213 &raquo;</TD></TR><TR><TD CLASS="quote">well this is cool


...........NOW IS IT REALY POSSIBLE TO PUSH CLOSE TO 300 HP ON STOCK SLEVES IF SO.........</TD></TR></TABLE>

yes, but do not bore it 30 over.

 

http://www.turbod16.com/viewtopic.php?t=4619

429whp and 296lb-ft, 10.27@142mph . No wheelie bars, 1.5L. That was 6 years ago.

 

When in comes to 1/4 mile Ds...

Sean Devine is the Quickest..10.22
Jason Whitfield is the Fastest..145

 

nice

 

man thats quick for a d...

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91tegrals &raquo;</TD></TR><TR><TD CLASS="quote">man thats quick for a d...</TD></TR></TABLE>

dood thats quick for anything

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shadow103rd &raquo;</TD></TR><TR><TD CLASS="quote">

Do you run out of gas becuase you only have a little bit of gas or is that at a full tank.....that would suck if you had to run your car like that</TD></TR></TABLE>

Not enough fuel in the tank

 

damm lots of responds cool

ya i did mean who was the quickest

i know the all mighty Bisi himself is the fastest + quickest and also what is my biggest insperation to make a D walk all over everything besides the man himself

Bisi I bow down

im hopeing to be the quickest D ever but im still young only being 20 in all but i got a lot of time to achieve my goal and hopefully make a mark in history such as Bisi did,has,and always will

POWER TO THE "D"

 

These guys that are running 10's, are they running an SOHC VTEC head or NON-VTEC?