most powerfull D motor????
who has the most powerfull "D"????
or who is running the fastest??? |
|
Re: (USDMDC2)
on this board? i'd have to say zex man, then brian (turbodcx) for the street cars
|
Re: (CivicRyda2k)
Am I the fastest street D16 ?
|
Re: (Civic TSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Civic TSI »</TD></TR><TR><TD CLASS="quote">Am I the fastest street D16 ?</TD></TR></TABLE>
At 11.68 right now you might be. There are a couple others on this board in the process of building one that may beat that though. |
Re: (Civic TSI)
oh yah i actually forgot about you meng hehehe. well he did say most powerful... what did u dyno at? i know brian dynoed mid 300's
|
Re: (CivicRyda2k)
He also said the fastest https://honda-tech.com/forums/images/smilies/emwink.gif But did he met quickest ?
|
Re: (Civic TSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">There are a couple others on this board in the process of building one that may beat that though</TD></TR></TABLE>
I'm working on that too https://honda-tech.com/forums/images/smilies/emwink.gif |
Re: (Civic TSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Civic TSI »</TD></TR><TR><TD CLASS="quote">
I'm working on that too https://honda-tech.com/forums/images/smilies/emwink.gif</TD></TR></TABLE> Sweet. I myself am starting to piece a street turbo setup together (not going to be the fastest though). I'm trying to decide between a Garrett T3/T4 50 trim and Precision SC50. The goals are 300-350whp. Stock sleeves, SRP pistons and Eagle rods. |
Re: (Civic TSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Civic TSI »</TD></TR><TR><TD CLASS="quote">Boosted D16
11.68 @ 117.33mph, running out of gas in 4th </TD></TR></TABLE> Do you run out of gas becuase you only have a little bit of gas or is that at a full tank.....that would suck if you had to run your car like that |
Re: (shadow103rd)
Jason Whitefield old school non vtec D series. I don't know if any one beat his record or not.
|
Re: (99blackcivicSi)
ill be there soon . the building process of the monster is in very early stages...can you say bored 20 over and stroked 20 over
|
Re: (Hella_JDM)
the fastest d series turbo car on honda-tech that i know of is matt patrick(zexman). 10.85 @ 135. street car in street trim. no wheelie bars.
http://www.fastestfwdstreetcars.com/...tos/zexman.bmp bisi is on here sometimes and he ran 10's with a d series all motor. in a pro car. |
Re: most powerfull D motor???? (jdmchop)
well this is cool
RIANCIVIC wants to push 300+ hp on stock sleeves and forged internals WOW im not the only one that wants to do that. Now it this possible my plans are forged pistons+rods no more than .030 over (stock if posible) now i now that the power is in ur head not ur block so there for im going to do a stage 3 prt and polish first. when i get more money, valves alone with a 3 angle valve job then camshaft. NOW can some of u guys with experiance with the sohc tell me beside a turbo whate else i need and how can i start to build power, knowing that i alreaddy have a turbo kit instaled NOW IS IT REALY POSSIBLE TO PUSH CLOSE TO 300 HP ON STOCK SLEVES IF SO i will be even a more proud of my sohc than if i would of done a swap sorry if this does not make a lot of sence |
Re: (Hella_JDM)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM »</TD></TR><TR><TD CLASS="quote"> can you say bored 20 over</TD></TR></TABLE>
yes <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM »</TD></TR><TR><TD CLASS="quote">and stroked 20 over</TD></TR></TABLE> huh? How do you stroke a motor 20 over? Do you mean increase the stroke .020? Im not quite understanding what you meant |
Re: (Altered)
ya my bad i didnt think i needed to clarify hehehh
|
Re: most powerfull D motor???? (zigzag765213)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zigzag765213 »</TD></TR><TR><TD CLASS="quote">well this is cool
...........NOW IS IT REALY POSSIBLE TO PUSH CLOSE TO 300 HP ON STOCK SLEVES IF SO.........</TD></TR></TABLE> yes, but do not bore it 30 over. |
http://www.turbod16.com/viewtopic.php?t=4619
429whp and 296lb-ft, 10.27@142mph . No wheelie bars, 1.5L. That was 6 years ago. |
Re: (hatchback19)
When in comes to 1/4 mile Ds...
Sean Devine is the Quickest..10.22 Jason Whitfield is the Fastest..145 |
nice
|
man thats quick for a d...
|
Re: (91tegrals)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91tegrals »</TD></TR><TR><TD CLASS="quote">man thats quick for a d...</TD></TR></TABLE>
dood thats quick for anything |
Re: (shadow103rd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shadow103rd »</TD></TR><TR><TD CLASS="quote">
Do you run out of gas becuase you only have a little bit of gas or is that at a full tank.....that would suck if you had to run your car like that</TD></TR></TABLE> Not enough fuel in the tank https://honda-tech.com/forums/images...s/emhammer.gif |
Re: (Civic TSI)
damm lots of responds cool
ya i did mean who was the quickest https://honda-tech.com/forums/images...s/emsmilep.gif i know the all mighty Bisi himself is the fastest + quickest and also what is my biggest insperation to make a D walk all over everything besides the man himself https://honda-tech.com/forums/images/smilies/emwink.gif Bisi I bow down im hopeing to be the quickest D ever but im still young only being 20 in all but i got a lot of time to achieve my goal and hopefully make a mark in history such as Bisi did,has,and always will POWER TO THE "D" |
Re: (jdmchop)
These guys that are running 10's, are they running an SOHC VTEC head or NON-VTEC?
|
All times are GMT -8. The time now is 02:54 AM. |
© 2024 MH Sub I, LLC dba Internet Brands