most powerfull D motor????
#5
Honda-Tech Member
Join Date: Feb 2003
Location: Margaritaville
Posts: 7,355
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Civic TSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Civic TSI »</TD></TR><TR><TD CLASS="quote">Am I the fastest street D16 ?</TD></TR></TABLE>
At 11.68 right now you might be. There are a couple others on this board in the process of building one that may beat that though.
At 11.68 right now you might be. There are a couple others on this board in the process of building one that may beat that though.
#6
Honda-Tech Member
Join Date: Oct 2001
Location: Pembroke Pines, Florida, United States
Posts: 6,024
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Civic TSI)
oh yah i actually forgot about you meng hehehe. well he did say most powerful... what did u dyno at? i know brian dynoed mid 300's
Trending Topics
#8
Junior Member
Join Date: Jan 2001
Location: Montreal, Qc, Canada
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Civic TSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote »</TD></TR><TR><TD CLASS="quote">There are a couple others on this board in the process of building one that may beat that though</TD></TR></TABLE>
I'm working on that too
I'm working on that too
#9
Honda-Tech Member
Join Date: Feb 2003
Location: Margaritaville
Posts: 7,355
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Civic TSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Civic TSI »</TD></TR><TR><TD CLASS="quote">
I'm working on that too </TD></TR></TABLE>
Sweet. I myself am starting to piece a street turbo setup together (not going to be the fastest though). I'm trying to decide between a Garrett T3/T4 50 trim and Precision SC50. The goals are 300-350whp. Stock sleeves, SRP pistons and Eagle rods.
I'm working on that too </TD></TR></TABLE>
Sweet. I myself am starting to piece a street turbo setup together (not going to be the fastest though). I'm trying to decide between a Garrett T3/T4 50 trim and Precision SC50. The goals are 300-350whp. Stock sleeves, SRP pistons and Eagle rods.
#10
Re: (Civic TSI)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Civic TSI »</TD></TR><TR><TD CLASS="quote">Boosted D16
11.68 @ 117.33mph, running out of gas in 4th
</TD></TR></TABLE>
Do you run out of gas becuase you only have a little bit of gas or is that at a full tank.....that would suck if you had to run your car like that
11.68 @ 117.33mph, running out of gas in 4th
</TD></TR></TABLE>
Do you run out of gas becuase you only have a little bit of gas or is that at a full tank.....that would suck if you had to run your car like that
#13
Re: (Hella_JDM)
the fastest d series turbo car on honda-tech that i know of is matt patrick(zexman). 10.85 @ 135. street car in street trim. no wheelie bars.
bisi is on here sometimes and he ran 10's with a d series all motor. in a pro car.
bisi is on here sometimes and he ran 10's with a d series all motor. in a pro car.
#14
Honda-Tech Member
Join Date: Aug 2003
Location: big SLC
Posts: 305
Likes: 0
Received 0 Likes
on
0 Posts
Re: most powerfull D motor???? (jdmchop)
well this is cool
RIANCIVIC wants to push 300+ hp on stock sleeves and forged internals WOW im not the only one that wants to do that. Now it this possible
my plans are forged pistons+rods no more than .030 over (stock if posible) now i now that the power is in ur head not ur block so there for im going to do a stage 3 prt and polish first. when i get more money, valves alone with a 3 angle valve job then camshaft.
NOW can some of u guys with experiance with the sohc tell me beside a turbo whate else i need and how can i start to build power, knowing that i alreaddy have a turbo kit instaled
NOW IS IT REALY POSSIBLE TO PUSH CLOSE TO 300 HP ON STOCK SLEVES IF SO i will be even a more proud of my sohc than if i would of done a swap
sorry if this does not make a lot of sence
RIANCIVIC wants to push 300+ hp on stock sleeves and forged internals WOW im not the only one that wants to do that. Now it this possible
my plans are forged pistons+rods no more than .030 over (stock if posible) now i now that the power is in ur head not ur block so there for im going to do a stage 3 prt and polish first. when i get more money, valves alone with a 3 angle valve job then camshaft.
NOW can some of u guys with experiance with the sohc tell me beside a turbo whate else i need and how can i start to build power, knowing that i alreaddy have a turbo kit instaled
NOW IS IT REALY POSSIBLE TO PUSH CLOSE TO 300 HP ON STOCK SLEVES IF SO i will be even a more proud of my sohc than if i would of done a swap
sorry if this does not make a lot of sence
#15
Re: (Hella_JDM)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM »</TD></TR><TR><TD CLASS="quote"> can you say bored 20 over</TD></TR></TABLE>
yes
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM »</TD></TR><TR><TD CLASS="quote">and stroked 20 over</TD></TR></TABLE>
huh? How do you stroke a motor 20 over? Do you mean increase the stroke .020?
Im not quite understanding what you meant
yes
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Hella_JDM »</TD></TR><TR><TD CLASS="quote">and stroked 20 over</TD></TR></TABLE>
huh? How do you stroke a motor 20 over? Do you mean increase the stroke .020?
Im not quite understanding what you meant
#17
Re: most powerfull D motor???? (zigzag765213)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zigzag765213 »</TD></TR><TR><TD CLASS="quote">well this is cool
...........NOW IS IT REALY POSSIBLE TO PUSH CLOSE TO 300 HP ON STOCK SLEVES IF SO.........</TD></TR></TABLE>
yes, but do not bore it 30 over.
...........NOW IS IT REALY POSSIBLE TO PUSH CLOSE TO 300 HP ON STOCK SLEVES IF SO.........</TD></TR></TABLE>
yes, but do not bore it 30 over.
#18
Junior Member
Join Date: Oct 2002
Location: Pa, 15401
Posts: 941
Likes: 0
Received 0 Likes
on
0 Posts
http://www.turbod16.com/viewtopic.php?t=4619
429whp and 296lb-ft, 10.27@142mph . No wheelie bars, 1.5L. That was 6 years ago.
429whp and 296lb-ft, 10.27@142mph . No wheelie bars, 1.5L. That was 6 years ago.
#22
OG triple OG
Re: (91tegrals)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91tegrals »</TD></TR><TR><TD CLASS="quote">man thats quick for a d...</TD></TR></TABLE>
dood thats quick for anything
dood thats quick for anything
#23
Junior Member
Join Date: Jan 2001
Location: Montreal, Qc, Canada
Posts: 251
Likes: 0
Received 0 Likes
on
0 Posts
Re: (shadow103rd)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by shadow103rd »</TD></TR><TR><TD CLASS="quote">
Do you run out of gas becuase you only have a little bit of gas or is that at a full tank.....that would suck if you had to run your car like that</TD></TR></TABLE>
Not enough fuel in the tank
Do you run out of gas becuase you only have a little bit of gas or is that at a full tank.....that would suck if you had to run your car like that</TD></TR></TABLE>
Not enough fuel in the tank
#24
Honda-Tech Member
Thread Starter
Re: (Civic TSI)
damm lots of responds cool
ya i did mean who was the quickest
i know the all mighty Bisi himself is the fastest + quickest and also what is my biggest insperation to make a D walk all over everything besides the man himself
Bisi I bow down
im hopeing to be the quickest D ever but im still young only being 20 in all but i got a lot of time to achieve my goal and hopefully make a mark in history such as Bisi did,has,and always will
POWER TO THE "D"
ya i did mean who was the quickest
i know the all mighty Bisi himself is the fastest + quickest and also what is my biggest insperation to make a D walk all over everything besides the man himself
Bisi I bow down
im hopeing to be the quickest D ever but im still young only being 20 in all but i got a lot of time to achieve my goal and hopefully make a mark in history such as Bisi did,has,and always will
POWER TO THE "D"