Just wanna know what everybodys plans are for their cherished chariots for 2004! Ironically (sometimes), the mods list seems to be growing longer and longer the quicker I cross them off! I should have stuck to 2 wheels from day 1 instead. Pls care to list the mods that you're gonna do

 

DRAG III FMIC (already got it)
custom IC piping
Walbro 255lph intank fuel pump
290cc prelude injectors
Apexi VAFC
16" wheels - either Kosei K1's or Rota Slips
Axxis Metal Masters pads w/OEM rotors
ATE Super Blue brake fluid
Apexi N1 cat-back exhaust
test pipe
Auto Meter triple gauge pod
Oil pressure gauge
A/F gauge
Boost gauge (already have)

Expected HP - 200-210whp @ 10 psi on the greddy SOHC turbo

Nothing else planned for the car after that. This Honda **** is getting frustrating/expensive/annoying/time-consuming.

 

Ummm hit the dyno and tune my h22-T in my 95 eg. If cant get the afc hack tuned good enough invest in AEM EMS. New tires, and maybe set of buddy club 15" wheels(gunmetal with polished lip)..

Get little things repainted like my front lip, door jams, sideskirts.

Pick up a set of gsr leathers for front and rear.

Save the rest of my money for a build.

 

Precision SC61
31x12x3.5 IC
Revhard Intake manifold
720cc injectors
GSR Cams

everything else is still the same...going for 400whp...stock b16a

Also new brakes and suspension

 

1>put in my itr tranny with kaaz, along with 6 puck clutch, lightened flywheel.

2>get tuned with AEM ems

3> edelbrock IM
4> traction via new shocks, tires and jim fab bars.
5> Get oem front with cf lip
6> volk se37s bronze
Then thats all my plans i have for my car. Maybe end of year start on a new car.

 

700whp!!!!!!!! ..................Nah just kidding! Upgrade my fuel system pump, sump, , put my 1000cc injectors in, Upgrade to my Hondata S200B so I can have capabilities to rev to 11,000RPM but only want to rev to 10k. Get my roll cage welded in, put the car on a diet. Add new gauges with all peak hold/warning to replay. But Hondata tuning software to tune my own ish! Run 10.50s or better Traction and suspension tuning! Get my ported head from RLZ Engineering http://www.hondaraceengines.com

 

1.) Complete my turbo system.
2.) Complete my Fuel system.
3.) Have a cage welded in.
4.) Decide on a ems (leaning twards AEM)
5.) Buy and build a dart tall deck block.

 

build my spare block for more boost

 

Ummm..

Get a SC61 or Full Race t3/t67, Johnny Race Car Intercooler, Uberdata or VAFC hack, injectors, some manifold, TiAL wastegate/bov ... and ... everything else needed to feed my b16a2.

Goal: 300whp

 

Keep em' comin..

 

OK, my plans FOR 04 are the folowing:

1) 15" Dunlop Formula R rubber - Actually this is a little premature as I couldn't wait so I'd already put them on just before Xmas

2) Spoon calipers and ProjectMu rotors and pads.

3) New rear bumper.

Now for the engine:

1) Port n polish
2) CP Pistons
3) Eagle rods
4) AEBS head studs
5) 880cc Precision injectors
6) Walbro intank
7) Standalone (Hondata or DIY)

Aiming for 400 - 450whp.


Wish List:

1) 15x7 Lightweight Volks on DJ01R 225 50 15
2) Equal length mani
3) Bigger snail
4) Roll cage

 

1. clutch
2. innovative motorsports lm-1
3. get completely running and correct my a/f ratio.


Modified by twkdCD595 at 4:54 PM 1/3/2004

 

Water Injection
FMIC Water Sprayer
Clean Up Body, Maybe Paint Job
Tune, Tune, Tune

 

SC61 Turbo
Sleeved GSR block
and about 450 to the wheels

 

put in my sc34(still waiting on it from precision since 11/20 )
get tuned
better tires
shocks and springs(undecided)
Traction bars.
and thats where i'm stopping all this madness

 

My plan is to put my motor in and drive it without problems so I can stop having all these nightmares.

 

Install the T3/t04e I've had sittin as a paper weight (since its taking forever to get my manifold back from jetcoat)
Get LMS-1
Tune it to near perfection
Don't blow my **** up
Throw a GSR tranny in there somehere
Maybe a cage
Maybe a Quaife

 

bigger injectors, built motor, drag radials, and alot more

 

Learn how to drive on my new setup. You can make all the power in the world but if you cant drive it then its really worthless. Numbers are only selling schemes. That is my mods for '04.

art

 

wow this is gonna take a minute i got my 2nd gen show car in the shop with all the above
1) fully built b18b-rs sleeved, wiesco 84mm, probe rods, balanced blue printed
2)b18b head p&p (by red zone) crower springs and retainers
3)t3/t4 60 trim
4) spearco 3x26x7
5)jg polished intake mani
6) 880 percision injectors
7) 70mm str tb
8) s200b with 3 bar map
9)str fuel rail, cam gears, pulleys
10) tial 38mm
11) tune tune tune
thaats most of it and the biggest get a magazine this year !!!