I just got an OBD1 LS motor and I am going to put it into my 00HB.

I am not sure which mounts to use?

How about the dizzy?

I did do an search but nothing really came up

TIA

 

u use everything from an 00 si (dohc vtec)

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMBOLONI &raquo;</TD></TR><TR><TD CLASS="quote">u use everything from an 00 si (dohc vtec)</TD></TR></TABLE>

ohic, some told me that I need to buy an mount kit, but I really do perfer the stovk honda mounts.

Thanks

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by trbcivic &raquo;</TD></TR><TR><TD CLASS="quote">I just got an OBD1 LS motor and I am going to put it into my 00HB.

I am not sure which mounts to use?</TD></TR></TABLE>

No aftermarket mounts are necessary. You will need a 99-00 Si driver's side mount bracket and rear bracket. The upper tranny mount you can reuse the stock one. The front tranny mount bracket can be 99-00 Si or 94-01 Integra. Same applies to the A/C bracket unless you want to keep A/C. If so you will need a Del Sol VTEC bracket.

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote &raquo;</TD></TR><TR><TD CLASS="quote">How about the dizzy?</TD></TR></TABLE>

You will need to get an LS/GS/RS or CRV nonVTEC distributor. OBD2 will be plug and play with your engine harness, you can also use an OBD1 Integra distributor but you will need to switch the plugs.