Hi,
just brainstorming a future setup,

i've got a dx hatch with some stuff pulled out of it(just minor stuff, spare tire, cargocover, tire cover, wiper resevoir, splahsguards).

i'm thinking about running a d16z6,
but with some headwork done, a nice fairly agressive cam, gear,
some porting, and some tuning too.
and boltons ofcourse,

what would you expect I could get from this?
i know its not possible to figure out exactly, i'm just trying to get some sort of idea.

1/4 times(agian.. i know.. they vary, heh just bear with me here)
hp/tq ??

THANKS!!

 

it depends who does the head work and what kind of cam u run.i have seen two set ups with different cams and different head porters and way different outcums

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by kyosoeg6 &raquo;</TD></TR><TR><TD CLASS="quote">it depends who does the head work and what kind of cam u run.i have seen two set ups with different cams and different head porters and way different outcums</TD></TR></TABLE>

what kind of outcomes?(... outcums?? hehehee)

 

i had a d16z6 with ihe and did a best of 15.38@83mph @4000ft elevation.around here s2gs hit about a 15.4-15.0 depending on the driver.fro sum reason my set up was really strong.

you should check out http://www.speedmachineracing.com
if u are really into the dseries motors.this guyran a best of 11.6 in a crx si 2000lbs before stand alone and anr header(ithink)maybe different header.

i will post up how my car runs as soon as its done.
ps use a d16y8 head,smaller cc less chance of detonation

 

well one guy had a bullfrog head package.(which everything but the head is a good idea)and another guy had a portflow head with a b20 throttle body bullfrog gorilla cam and a hondata s200.the bullfrog guy put down 135hp and did a 14.2.and the portflow head guy put down like 165hp and ran a 13.7.both drivers were consistant on thier times.and these times were run at firebird raceway in az

 

cool,

yeah i'm definetely down for the dseries.
I dont think I could ever see myself gettin a bseries engine... i'm just not into them.

And hey, about the bullfrog guy and portflow guy, what chassis were those #'s in ??

thanks for all the info, very interesting

 

the quicker one was actually a si hatch and the slower one was in a cx

 

matt from speedmachineracing.com ran 8.29 in the 1/8 a couple weeks ago here in san diego at Qualcom.with a d16z6, He is the guy to talk to about single cam engines.