got a new time. however, this run was with my cylinder compression as follows
1: 120
2: 180
3: 180
4: 180

so basically i was running on 3 cylinders... to bad i only got half the slip, i raced alan, the owner on honda heaven a junk yard here in arlington, he ran a 10.88@131 to my time, fast little ****** hatch, full interior also...actually it was the fastest car out there, a z06 was runnin 11.0 left and right on a 250 shot, there were good cars a **** LOAD of srt-4's like 8 or so, didnt see any times...

but here was my time

60ft
2.28

1/8
9.56

1/8 mph
75.11

1/4
14.78

1/4 mph
94.08

this was my second run, my first run i spun first with a 2.44 60ft and went 14.9@94.1

not to bad for only having 3 cylinder...ps..new rings going in this week, along with thinner head gasket...

and you can imagine seein my 14.7 to allen's 10.88 - it was a ****** JOKE!!, i dont know if you guys have ever seen a 10 second hatch...but holy ****...by the time i was shifting to 2nd gear he was at the 1/8 mile...by the time i got to the 1/8 mile he was done...i must say it was a privledge to race next to him, not many people get to do it...i hope someone got it on video...


[]Deace
Matt

 

what you got in your motor?

 

its stock, stock head, stock bottom end, stock cams, everything internally is stock, just bolt on's thats all, once i get this ring fixed i am shootin for a 14.2ish around 97-98 - i think i can do it

 

where did you race, ennis?

do you have the address to honda heaven. im located in cedar hill.

 

500 Dixon Lane
Arlington, TX 76012

always have to know that...

14's isnt bad..but not a whole lot of people look to good against alan's hatch..

 

Alans car sounded sweet. I've been wanting to go turbo for awhile, but his car just makes me want it all My car was slow out there that night. I finnally break into the 13's and everything is faster than me

 

pretty good i got stock b20/vtec too. but the best i ran is 14.9 94mph without any bolt on's. just wondering what rpm you launch at? thanks

 

well with 22 psi in my tires i launched at 4300 and spun like a mother ******

with 15 psi i launched at 4500 and bogged like a ****

this was my first time launching the car with the b20 - its got so much more low end torque it either boges cuase i'm not launchin high enough or spins like a bitch cause its to high!

 

hey slowazzhatch are you going out there the 14th? I was just wondering if there was going to be another decent turnout...