sleving block what compresion pistons?
Thread Starter
Honda-Tech Member
Joined: Aug 2003
Posts: 305
Likes: 0
From: big SLC
sleving block what compresion pistons?
well the dream is closer im about to send my sohc block to be slived now i have a cuestion to someone the might now or some1 with a setup like this
since is just a sohc they are not so powerfull before boost so i was thinkin to raise the comprecion but i m planing to run 15-20 lbs so i think low compresion pistons will be good or even keep it the same i hope some1 outthere can help me
since is just a sohc they are not so powerfull before boost so i was thinkin to raise the comprecion but i m planing to run 15-20 lbs so i think low compresion pistons will be good or even keep it the same i hope some1 outthere can help me
Honda-Tech Member
Joined: Aug 2002
Posts: 2,273
Likes: 0
From: Cincinnati, OH, USA
Re: sleving block what compresion pistons? (pissedoffsol)
i just had a block sleeved through benson and my piston of choice was the CP 9.8 to 1
either way you go it will make good power.
either way you go it will make good power.
Honda-Tech Member
Joined: Sep 2002
Posts: 2,865
Likes: 1
From: Wooster, Ohio, usa
Re: sleving block what compresion pistons? (g2turbo)
i like high compression. just be very concervative on your tuning. how much is it costing u guys to get sleeves? im ganna need to get mine done over xmas.
Junior Member
Joined: Jan 2002
Posts: 922
Likes: 0
From: Philadelphia, PA, USA
Re: sleving block what compresion pistons? (boosted hybrid)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by boosted hybrid »</TD></TR><TR><TD CLASS="quote">Do you want to make power on pump gas or race gas?
Pump gas=9:1
Race gas=10:1</TD></TR></TABLE>
How about 10:6
or 10:4 Jeff? Can you tune them?
Pump gas=9:1
Race gas=10:1</TD></TR></TABLE>
How about 10:6
or 10:4 Jeff? Can you tune them?
Thread
Thread Starter
Forum
Replies
Last Post
ej1bseries
All Motor / Naturally Aspirated
18
Sep 19, 2011 04:30 PM
