D16 Vtec with i/h/e running 15s?
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 519
Likes: 1
From: Sparks, Nevada, United States
D16 Vtec with i/h/e running 15s?
do you think its possible to run low 15s in sohc vtec i/h/e maybe even cams? if not how much do you think it could run? Thanks
Honda-Tech Member
Joined: Jun 2002
Posts: 1,369
Likes: 0
From: The Mitten, USA
Re: D16 Vtec with i/h/e running 15s? (youngwon22)
Recommend you retry to post this in the drag racing forum but with my dx shell and that motor with that setup I pulled a best of 15.2 on almost bald steelies. But wrong forum and search is your friend. There is a thread about any question typically on here. 
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 519
Likes: 1
From: Sparks, Nevada, United States
Re: D16 Vtec with i/h/e running 15s? (DX Hybridizer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DX Hybridizer »</TD></TR><TR><TD CLASS="quote">Recommend you retry to post this in the drag racing forum : </TD></TR></TABLE>
sorry about that
sorry about that
Thread Starter
Honda-Tech Member
Joined: Apr 2003
Posts: 519
Likes: 1
From: Sparks, Nevada, United States
Re: (3RdT)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 3RdT »</TD></TR><TR><TD CLASS="quote">also depends on tha way u drive 2</TD></TR></TABLE>
like? well someone told me that shifting 500 over redlines bad...well i shift 500rpm over redline any better theory?
like? well someone told me that shifting 500 over redlines bad...well i shift 500rpm over redline
any better theory?
Trending Topics
Honda-Tech Member
Joined: Jun 2002
Posts: 1,369
Likes: 0
From: The Mitten, USA
Re: (Sinner)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Sinner »</TD></TR><TR><TD CLASS="quote">depends on the weight of your car. if your a vary light car is possible maybe.</TD></TR></TABLE>
Good point I was running 2120 with me in car! I was pretty well gutted for a dx.
Next the best way to find out shifts is to get a dyno find your tq/hp curve take that and ummm ok here you'll notice I lose the knowledge but find out when to shift to hit right at that point. Typically it's about 500 rpms lower than redline.
I don't know I shift at redline and got those times. My biggest thing that changed my times in these torqueless wonders was my launch rpm and tire PSI.
Here is a image of my time slip and if memory serves I documented the tire PSI cause well duh I don't remember to well.
Sorry link doesn't directly go. Go to conekillers and the very top one michael.
It's got a video/timeslip/link to track of the time. Beat that proof!!!!!
http://www.coneheadsracing.com/index2.htm
Good point I was running 2120 with me in car! I was pretty well gutted for a dx.
Next the best way to find out shifts is to get a dyno find your tq/hp curve take that and ummm ok here you'll notice I lose the knowledge but find out when to shift to hit right at that point. Typically it's about 500 rpms lower than redline.
I don't know I shift at redline and got those times. My biggest thing that changed my times in these torqueless wonders was my launch rpm and tire PSI.
Here is a image of my time slip and if memory serves I documented the tire PSI cause well duh I don't remember to well.
Sorry link doesn't directly go. Go to conekillers and the very top one michael.
It's got a video/timeslip/link to track of the time. Beat that proof!!!!!
http://www.coneheadsracing.com/index2.htm
Thread
Thread Starter
Forum
Replies
Last Post
Nick M
All Motor / Naturally Aspirated
1
Mar 29, 2007 02:48 PM
Reservation-Sensation
Honda CRX / EF Civic (1988 - 1991)
2
Mar 4, 2005 10:03 AM
