What brand is the best and how many layers to use?

 

just use the stock one bout the bast you can get...

 

Do I use all of the layers or do I tear it apart?

 

you have to take out the rivets, (i dont remember which side, intake or exaust) you can look on http://www.c-speedracing.com and look in their how to section. i would leave all 3 layers in, your timing will get retarded when you start messing with milled heads/decks, or 1 and 2 layer head gaskets.

-sander

 

if you already upped the compression with pistons just use an oem b18a head gasket, if not and you want to up the compression a little, take the middle layer out.