I am going all motor with my b16a2 motor. I was thinking of a toda stroker kit with the toda spec b cams. This raises the displacement to a 1.8. There is a crower stroker kit that raises the displacement to 2.0 or 2.1. I can't remember exactly. What do you guys/girls think, toda or crower or another kit. And also what cams should I go with. Also, I was thinking toda headers. Any other suggestions?

 

i personally think its way overprices for the amount of power u get. it is however a nice sleeper though. if it were me i would throw an ls crank or gsr crank using ls or gsr rods in there with custom shorter pistons.

 

Its over priced. Itlll screw up your r/s ratio. You should just bore it out.

 

i have a complete itr bottom end ie. crank, rods, pistons, and flywheel if interisted email me eg_type_r93@yahoo.ca 1.6-1.8
daniel

 

why dont you just get a b18 or b20 bottom block and save yourself the hassle.

-b18 (b,c1,c5) short block- 700
-b20 short block- 500-600
-stroker kit- overpriced

 

if you wanna stroke it, the crower kit is the way to go. The b16 kit turns it to a 1.9 which will be a nice bump in tq. Just boring the block will do nothing substantial unless you go with a 1.8 or 2.0 block to begin with. Your choice.