edelbrock header fitment issues
Has anyone had trouble with the fitment of Edelbrock headers? I was just about to install mine and one of they guys from work did his and it didn't line up with the cat correctly, touched the A/C fan shroud, and was about 1mm away from the clutch slave cylinder bleeder fitting. I looked at mine tonight and it looks like at the very least I'm going to have the near touch condition with the bleeder screw.
Anyone else have issues? Any resolution?
Anyone else have issues? Any resolution?
Pretty unclear there.....I take it, since your writing in a Civic forum, and Edelbrock doesn't make a Civic header, it must be a B-series swap in some kind of Civic?
Which header on what car and which engine?
Which header on what car and which engine?
http://www.edelbrock.com/autom....html
click on headers p/n#6692 is for the 92-95 LX, DX, EX & SI plus the 96-00 Civic EX. Guy who tried it already has a 99 EX and I have a 95 Si. The bends in the upper half come towards the passenger side almost even with the edge of the header mounting flange. If you look on your car you can see why that position would be basically touching the clutch bleeder screw.
Jeremy
95 Si
click on headers p/n#6692 is for the 92-95 LX, DX, EX & SI plus the 96-00 Civic EX. Guy who tried it already has a 99 EX and I have a 95 Si. The bends in the upper half come towards the passenger side almost even with the edge of the header mounting flange. If you look on your car you can see why that position would be basically touching the clutch bleeder screw.
Jeremy
95 Si
if anyone's interested i have the header and race pipe for sale https://honda-tech.com/zerothread?id=550304
Thread
Thread Starter
Forum
Replies
Last Post
Kidnkorner
Acura RSX DC5 & Honda Civic EP3
3
Jul 15, 2005 08:20 PM
dasher
For Sale
36
Oct 30, 2004 02:19 PM
derek01civiclx
Honda Civic / Del Sol (1992 - 2000)
1
Apr 22, 2002 06:29 AM



