anyone know. the application would be for a mini me setup 91 crx si block and d16y8 head with 9:1 pistons. I will be using a t25 turbo and a zdyne to tune the engine. thanks

 

i've herd no more then about 12-15psi worth. Thats probally around 210-230hp and then you brake a rod a destroy a head. One word of advice, save for new rods, it'll be worth it in the end. Run less then 9psi and you'll be ok

 

well i have some crower forged in my zc right now that i could throw in but im a little worried that one might need to be machined. after i built the engine and boosted she seized on me. I suspect that its the stock bearings that i reused any ideas on if the crower rods will be reusable

 

no your best bet would be to sell them to me and buy some ls rods

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by VTgringo &raquo;</TD></TR><TR><TD CLASS="quote">well i have some crower forged in my zc right now that i could throw in but im a little worried that one might need to be machined. after i built the engine and boosted she seized on me. I suspect that its the stock bearings that i reused any ideas on if the crower rods will be reusable</TD></TR></TABLE>

take them to a machine shop and dont ask dumbass questions like this. how could anyone possibly know if the rods are ok without looking at them.

sorry to be a dick im tired