I notice about the last few week that my clutch is getting harder to step on, it's a 94 Integra w/ 120k miles. Is there anyway to adjust the clutch to make is softer?

 

I think mines going too.. bump for an answer

 

Its either the slave cylnder er the throw out bearing ...I think

 

it's cheap to try bleeding it.

 

if the spring housing on the clutch disc starts to chip (the metal brackets that keep the springs in place), it can make the pedal harder to push in. At 120k i wouldnt be suprised if it's on it's last leg.

 

Top

Doesn't seem like I'm getting a solid answer.....

 

if yer on a stock clutch .. its probably time for a new one.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tilt &raquo;</TD></TR><TR><TD CLASS="quote">if the spring housing on the clutch disc starts to chip (the metal brackets that keep the springs in place), it can make the pedal harder to push in. At 120k i wouldnt be suprised if it's on it's last leg. </TD></TR></TABLE>

Very true, that's what happened to mine. Except the spring exploded out and a shard of the disc locked into the pressure plate.



https://honda-tech.com/zerothread?id=534746

 

same thing happend w/ my freinds gsr clutch...he had about 140k on it so we pulled it apart and what not ..got the flywheel resurafced and put in a new cm stg 1...and after a friggin 8 hours of my weekend installing it..his car was stolen and stripped...i hate thieves