Hey everyone.. I purchased an incomplete DRAG turbo kit from a forum member a couple months ago, and we're finally starting to put it together.

We're still missing the oil feed line, return line, oil T tap and oil return flange.

If you have these parts, or know exactly where I can get them, please let me know..we have cash in hand and will need the parts asap. Thanks.

Kevin

 

if you bought a drag kit, you don;t need an oil feed flange. It has a threaded fitting hole for the oil feed.

let me know what you need or if you have pics, I'll check them out to pinpoint what parts/fittings/lines you need

stan

 

Thanks Stan! Well actually, the "used" kit only came with the piping, wastegate, and turbo. I dont have any of the hoses/lines, and no taps whatsoever. We recently installed a GReddy kit onto a SOHC, and were looking for the same T taps that bypasses the oil sender in the back of the block, w/braided feed line, plus the return flange needed on the oil pan. Let me know..thanks again.

 

TTT

 

stan's the man! he'll hook it up

 

i got these 3 parts u need...oil feed line, return line, oil T tap ....steel braided lines for the oil feed and return line..used but in good condition..located in los angeles,ca...if u still need these...make a reasonable offer..thanks