starting on turbo project for the summer
Thread Starter
Joined: Sep 2002
Posts: 599
Likes: 0
From: ca, usa
starting on turbo project for the summer
hey guys,
i'm finally going to turn to the darkside this summer. just need to decide which turbo i'm going to use. my b18c1 is completely stock so i'll only be boosting around 8-9 psi to start. i want good throttle response so i'm thinking of goin with something a little smaller than a t3/t4...
what do you guys think of a ball bearing t28?
i know the internal wg will be a problem, but i won't be boosting all that much. also, who makes manifolds with a t28 flange?
TIA
-demitri
i'm finally going to turn to the darkside this summer. just need to decide which turbo i'm going to use. my b18c1 is completely stock so i'll only be boosting around 8-9 psi to start. i want good throttle response so i'm thinking of goin with something a little smaller than a t3/t4...
what do you guys think of a ball bearing t28?
i know the internal wg will be a problem, but i won't be boosting all that much. also, who makes manifolds with a t28 flange?
TIA
-demitri
Honda-Tech Member
Joined: Jul 2002
Posts: 3,105
Likes: 0
From: Scottsdale, AZ, usa
Re: starting on turbo project for the summer (SSBP DC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SSBP DC2 »</TD></TR><TR><TD CLASS="quote">does anyone know how makes a manifold with a t28 flange?</TD></TR></TABLE>
i know HKS makes either a t25 or a t28 manifold, im not too familiar with the T series turbos so i don't know which exhaust flange looks liek what. check them out and see what you like
-ryan
i know HKS makes either a t25 or a t28 manifold, im not too familiar with the T series turbos so i don't know which exhaust flange looks liek what. check them out and see what you like
-ryan
Thread
Thread Starter
Forum
Replies
Last Post