My driver side axle is on its last breath.. I have place racing axles and am not sure if i have to get another place racing axle, or just any axle. If i'm not mistaken the 90-91 integra axles work on sir1's right? anyways question is if i have to get another place racing axle because they are both place racing. Any help would be greatly appreciated and even if anyone is selling one or knows of a good place to get them for cheap . Oh by the way its a J1 tranny if that matters.

 

you can use 90-93 integra axle

 

just make sure u use a 90-93 integ 1/2 shaft if your usin 90-93 axels n not the jdm 1/2 shaft

 

so i can use the right side place racing axle with the 90 integra axle on the left side?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 90Hatch &raquo;</TD></TR><TR><TD CLASS="quote">so i can use the right side place racing axle with the 90 integra axle on the left side? </TD></TR></TABLE>

yes, as long as you are using a 90-93 integra midshaft a 90-93 integra axle will work.

 

i used an integ axle on my crx and didnt change the halfshaft works fine

 

its called intermediate shaft.

 

its all the same

 

Thanks!

 

the J1 transmission uses the same intermediate shaft as the 90-93 integra

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 91civicDXdude &raquo;</TD></TR><TR><TD CLASS="quote">its called intermediate shaft.</TD></TR></TABLE>

who you trying to correct?

it's all the same dude. don't get smart.

hope things going well Jordan

 

no one is trying to be smart
call it wat you want but it is all the same

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jlicrx &raquo;</TD></TR><TR><TD CLASS="quote">the J1 transmission uses the same intermediate shaft as the 90-93 integra</TD></TR></TABLE>

Surely that would be Y1 transmission