i have just install my h22a in my 94 accord ex. some of the engine wiring harness do not match up to the car's harness....what do i do?

 

What year is the motor and what wiring harness are you using?

 

All sensors should match up and be in the same place.

If you have a JDM H22A swap, then you will need to use the Accord EX factory engine harness.

As for everything going on, everything should go right onto it and match up. What particular sensors are you missing on?

The ONLY other thing that would come into play, is if you have an OBD2 H22A. Then you have yourself some more things you need to do.

 

Also the wiring is going to be different on the harness with the external coil setup, and if you have a JDM OBD-1 H22, then it'll be using an internal coil and the wiring will need to be modified on the harness. Otherwise, for the most part 98% of the plugs will be the same.

 

http://www.h22a.org/5gswap.htm

 

i have a obd1 jdm h22a

 

you are saying to cut the main wire harnes and use my accords in place of it?

 

i dont think you need to do that cause im using my original harness from my 92 so? comon guys lets help this guy out?