D-series build up question........
Thread Starter
Junior Member
Joined: May 2003
Posts: 15
Likes: 0
From: PhoEnix, EriZonA, usa
D-series build up question........
i plan on building a d16z6 wit d16a1 pistons to spank all b16's!!! 
My question is, wat is the real CR on that build??? i've heard CR from 12:1 to 13:6? According to http://www.knology.net/~jediklc/D.htm, my CR is around 13:6? Can someone tell me what the real CR on that setup is??? I only have access to 91 octane and i know that's way too high for that gas.....Also has anybody tried using the 86-87 (pg6b) a1 pistons (1.2cc dome) instead? I figure with those pistons and .20 or .30 milled head, the CR would be around 11:5.......Help me out somebody... 
My question is, wat is the real CR on that build??? i've heard CR from 12:1 to 13:6? According to http://www.knology.net/~jediklc/D.htm, my CR is around 13:6? Can someone tell me what the real CR on that setup is??? I only have access to 91 octane and i know that's way too high for that gas.....Also has anybody tried using the 86-87 (pg6b) a1 pistons (1.2cc dome) instead? I figure with those pistons and .20 or .30 milled head, the CR would be around 11:5.......Help me out somebody... 
Junior Member
Joined: May 2002
Posts: 547
Likes: 0
From: San Diego, Ca., United States
Re: D-series build up question........ (daniboy4nspd)
https://honda-tech.com/zerothread?id=335078
Try this link.
Try this link.
Thread
Thread Starter
Forum
Replies
Last Post
SinglecamMitch
Honda Civic / Del Sol (1992 - 2000)
11
Dec 7, 2006 05:05 PM
Bense
All Motor / Naturally Aspirated
2
Jan 4, 2006 04:15 PM
daniboy4nspd
Honda Civic / Del Sol (1992 - 2000)
5
May 23, 2003 09:20 AM
