Why is there a huge dip there besides it being the vtec cross over. This is a GSR motor bored out to 84mm....

 

maybe lower your vtec x-over a bit?
good numbers though

 

DAHM!!! thats with stock compression? whats the displacement of a 84 mm GSR block? is 84 mm like 30' over?

 

The scale is not based at "0" and so the graph looks worse than it really is...

 

THats a pretty normal dip for vtec....without an AF reading its impossible to accurately help you

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by W.O.T. &raquo;</TD></TR><TR><TD CLASS="quote">The scale is not based at "0" and so the graph looks worse than it really is...</TD></TR></TABLE>
still drops 20hp.

i would like to see what the AF numbers look like

you should try lowering the vtec xover to 53-5400ish

what ECU you running?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Kamin &raquo;</TD></TR><TR><TD CLASS="quote">
still drops 20hp.

i would like to see what the AF numbers look like

you should try lowering the vtec xover to 53-5400ish

what ECU you running?</TD></TR></TABLE>
If you look the drop is less than 10 hp....not a big deal....

 

excuse me
20TQ not hp.