I used a tape measure.. end to end from the outside of the steering wheel.
My measurements are approximate in inches:
JDM ITR SRS: 14.5"
USDM Integra SRS: 15"

 

cool. you would think it would be the other way around, given that USA is chock full of fatasses trying to squeeze into the car, not to mention the height factor

 

well, the largest momo wheel is smaller than the stock steering wheel so it only
makes sense that the jdm momo wheel is smaller.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 98R-1144 &raquo;</TD></TR><TR><TD CLASS="quote">I used a tape measure.. end to end from the outside of the steering wheel.
My measurements are approximate in inches:
JDM ITR SRS: 14.5"
USDM Integra SRS: 15"</TD></TR></TABLE>

I always knew it was smaller, nobody believed me. Good info!

 

USDM wheel =

 

So, did you get it installed??

 

here is a pic of mine.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RTW DC2 &raquo;</TD></TR><TR><TD CLASS="quote">cool. you would think it would be the other way around, given that USA is chock full of fatasses trying to squeeze into the car, not to mention the height factor </TD></TR></TABLE>

Obese Americans

Those people cost us $93 billion a year.

Oh, and that it was common knowledge that the JDM wheel has a smaller diameter?

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Reid &raquo;</TD></TR><TR><TD CLASS="quote">

Obese Americans

Those people cost us $93 billion a year.

Oh, and that it was common knowledge that the JDM wheel has a smaller diameter?</TD></TR></TABLE>

I think it was common knowledge that the NON-SRS wheel was smaller in girth (hehe), but it wasn't really confirmed about the SRS...

 

I believe the Non-SRS JDM wheel is 13 3/4" if anyone wanted specs. Anyone wanna trade a JDM one for a brand new USDM one... Come on you know you could use a couple more inches