I'm just wondering what kind of range I have in resistance for the injectors. I went to the local electronics shop and the closest I found to the 10 ohm 15-20 watt resistors were 12 ohm 15 watt. Would I be ok running with these resistors, or would I need the 10 ohms?

 

I had my shop order in some 10w/10ohm resistors. I didn;t want to take a chance with something that hadn't been used before.

 

I've been reading that 10w wasn't enough, so I didn't want to get them...

 

i was going to say. at first i read 10 but i did some searching and found it wasnt enough ALTHOUGH my resistor box is 6!(and will work fine)

 

we use radio shack 10 ohm 10w...

 

and you've never had a problem with the 10w cooking soon?
I guess I'm going back to exchange these then.

 

nope no problems yet...