I have access to literally TONS of Saab injectors. Anybody know what size they are?

 

I don't know the size, but I have a local yard that has tons of saabs and Volvos and I would also like to know. And do they fit our cars? Are the saturated or peak hold types?

 

they are 340cc injectors bosch made 34lb hr.

here are there part numbers if you care
Fuel Injector
C1000-12973


[Modified by b18bturbo, 3:13 PM 3/4/2003]

 

cool...thanx V...I think I will be getting some for my gfs del sol(d16)....

 

also resistance is 11-18 ohm on those injectors which are direct fit for ours cars without resistor boxs.

Only prob you might have is the upperportion of the injector it might need to be grinded since is bosch style


[Modified by b18bturbo, 3:16 PM 3/4/2003]

 

ya....boostinLS(i think) converted a set of injectors over by modifying the upper half of the injectors in this manner.

 

we either drill the rail which is the easiest and simplest if you have drill press so you can make a clean cut.

 

oh ya...drill it out so the plastic insulator thing goes inside the rail correct?
I will probably do this...

 

yup but remember you do that you never can go back its hard as hell to do that. then you need a really really fat oring

 

or lots of mega-copper
its the stock rail, so if she has to go back, itll be with a GE or osmething nice like that....
shes running 10psi max, so ya...