I paid over $720 for these things and they are brand new and never been used. The IM, heatshield, and rail were installed for fitment only. I am no longer going to boost my car and have no need for these things. I ground off the logo and had a plug welded in end of the IM, then had it beadblasted.The Victor X manifold is for B18C1 heads. The rail has been powdercoated black. Included are Earl's fittings to mount the fpr on the side of the rail. There is also a Marshall 0-200 gauge mounted on it. I will sell the whole package for $590 plus shipping. Lowballers will be ignored.

I can be reached at JOHNNYJACKSTANDS on AIM and my email is thankyaverymuch@***.net. I have many references upon request and do accept Paypal with buyer paying the 3% fees.





[Modified by 1, 2:22 PM 2/17/2003]


[Modified by 1, 2:26 PM 2/17/2003]

 

 

 

what size are the fittings? to the rail and the regulator?

 

How about just the mani?My friend is looking to get one soon.Also if that was an aeromotive fpr i would probably ****** that up.

 

-8to-10 bulkhead w/nut
1/8npt plug
1/8npt 90 elbow
-4an to 1/4inch ezfit
-3 to 9/16-18 alum adapter

 

so its just the fittings, i'll just need a SS line ?

 

Actually, I may have an SS line with Earl's fittings that goes from filter to rail. I will check later and get back to you. I will include a pic, k?

 

i'd be interested when i see it complete. ss line from filter to the rail, and return.
c1turbo@hotmail.com is my email if u want to see me the picture.

 

o.k. I have don't have a return line.

 

 

 

 

for a good seller