i got a 94 Si, h22a1 engine, manuel tranny, and i think i have JDM ECU cus i can only go 120mph(grrr) i have a spoon chip coming in the mail and the seller says he doesnt know if it will work on JDM ECU, do any of you know if it will?

 

INLINE4.COM told me that Spoon didnt even make a chiped ECU for the P13

 

i dunno if they made one but they all work it should work fine with your ecu. as long as you know how to install it.

 

Spoon did make a chip for the P13 because they used to have it listed on their site. It was ECU specific....if you had TCS, 4WS, or any of those options, there were different programs.

 

Yes it should work fine on your ecu. Spoon used to offer many products for the H22a and for the preludes Spoon Ecu programs being one of them. The demand was never there so they canned making Prelude parts.

 

You will need a JDM code 006 (last 3 numbers) ECU. That's the ECU I have with the spoon chip. It work great and I got good gains on the Dyno, plus you don't have to worry about the speed limiter...so now you can go race Supra style!!

 

u guys are talking about a chip from spoon or the ECU that they have made?
Im looking into getting the ECU, but I dont know, if anyone has any input can you please elaborate
thnx in advance
CAtz

 

im talkin about the chip that attaches to the ECU

 

the JUN program for the p13 works just as well or better than the spoon

 

Do you have proof of this? Such as a dyno comparison between the two?

On a mildly modded (no internals) H22A, my Spoon ecu gave about 2-4 hp everywhere in the powerband. The only mods to the car were intake, vafc, exhaust.

I will test it out on my car on the dyno when I have time. I have a few more mods so we'll see how big of a difference it makes.