Rev Hard stage 2:





[Modified by 2000GSRT, 2:00 AM 2/15/2003]


[Modified by 2000GSRT, 2:01 AM 2/15/2003]


[Modified by 2000GSRT, 2:01 AM 2/15/2003]


[Modified by 2000GSRT, 2:16 AM 2/15/2003]


[Modified by 2000GSRT, 11:06 AM 2/15/2003]

 

Red X's

 

Damn, sorry they aren't showing up. Let me try again.

 

cool, how does it run?? Are you using the fmu + inline?

 

It's runs pretty good considering it's running on an untuned hondata map and a 2 1/4" exhaust so once I get those taken care of, I'm sure it will run even better. This setup is making more power at 6psi with the small exhaust than my JRSC setup did at 9psi.

 

Nice setup did you dyno yet? Hows it running lean, rich?

 

looks good brotha, blitz bov looks

 

Not sure if it's running rich or lean I'm using a base map from another turbo car. but no detonation on the j&s =

That's actually a Vortech blow off valve

 

hey i have a turbo ls with a drag gen III kit and im leaning out once i get under boost i have a walbro 255 fuel pump aem fuel pressure regulater and a vortec fmu can someone tell me what i need i put a fuel pressure gauge on it and im ideling at 90 to 95 psi so i dont know whats wrong i need to lower that but ill still have that problem i think

 

 

 

you must run more boost daniel son

 

Ahh yes, Mr. Miagi - I thought you might say that No boost for you!!!

 

I noticed You just put a filter and dont have the inlet pipe. I know the revhard kit doesnt come with one so I am probably going to do what you did for now. Does the filter slip off at all??

 

you have any whole PICS of your car
your a local guy to me then if you in Richmond

but theres allways a +for having a turbo gsr


[Modified by DLB1994, 11:08 PM 2/15/2003]

 

Yeah, it was tough getting that filter to fit in. There actually is a pipe there but it's really short. I used a 3" 90 degree elbow and a 3" to 2.75" rubber coupling to attach it to the turbo. The radiator fan also had to be replaced with a thinner one because the turbo was too big, but it also made more room for the filter Hasn't slipped any.
Good luck.....


[Modified by 2000GSRT, 6:12 PM 2/15/2003]

 

I'll have take some more pics of my car and post them. As soon as the weather clears up.

 

hey i'm from Richmond

 

Ahhh must see pics of intercooler daniel son

 

Nice placement of the yellow Neuspeed sticker, I have mine in exactly the same place.

Setup looks good btw.