Head work (milling) and cam timing
Thread Starter
New User
Joined: Jun 2001
Posts: 738
Likes: 0
From: At arms length....
Head work (milling) and cam timing
Ok folks!
I need to get the final verdict on a technical issue. I am in the process of having my C5 head reworked and part of the work includes milling the head.
The question is this... to correct for the milling how do I adjust cam timing. I am under the impression that 10 thou of milling is equal to 1 degree of retard on the cams.
Is this correct?
TIA
Nash
I need to get the final verdict on a technical issue. I am in the process of having my C5 head reworked and part of the work includes milling the head.
The question is this... to correct for the milling how do I adjust cam timing. I am under the impression that 10 thou of milling is equal to 1 degree of retard on the cams.
Is this correct?
TIA
Nash
Darth ModerVader
Joined: Jan 2001
Posts: 11,539
Likes: 1
From: Mustafar
Thread
Thread Starter
Forum
Replies
Last Post
JDMs1eeper
All Motor / Naturally Aspirated
18
Aug 24, 2003 12:01 AM