Hii my name is Mike and i have an 99 civic DX with a b18c type r with a p06 ecu (with vtec added in it)

recently i've remove the heater core the radio everything hooked to the climate **** ect ....
after i mark with a X all the plug useless and start my car . everything was fine , when i remove all the wire that goes to those plug my car doesn't start
i heard my fuel pump prime , the starter turn and i have fire

do you have any idea what can be my problem?

 

CEL codes?

 

what is a CEL code

 

Check engine light = CEL

When you are driving, does the CEL stay on steady?

When turn the key from OFF to ON(II), does the CEL turn on for 2 seconds and then turn off?

 

Cause i'm on a obd1 ecu on a obd2 car i don't have CEL code anymore ... in fact my CEL light is my shift light ....

 

Both OBD1 and OBD2 Civics have the CEL. If your CEL is the shift light, then jump the service connector. Watch it blink the CEL codes.

 

i'll check that thank ! i'll give you update on that!

 

After trying to have CEL code i realise that i remove too much wire and don't have everything pluged soo i bought another harness and it work ... thk for the help