Hey guys,

Can anyone here with a JDM titanium shift **** take measurements of the dimensions for me? I'm looking for these measurements:



*F is the diameter of the flat portion at the top as close as possible.

Thanks!!

 

No bother, but it'll be tomorrow as it's night where I am.

 

OK J, these are approximate measurements. The shift **** is quite rounded so getting hard points to measure from on some dimensions aren't easy. But here goes FWIW. In millimetres: D = 39mm F= 20mm A= 10mm B= 30mm C= 20mm E= 20. Note: the B measurement tapers inwardly from the top. From approx 39mm to 35mm. Hope that helps.

 

Thank you!

 

Anytime. Glad to be of help for a nice change

 

Anyone know why some ITR shift ***** are chrome and others are a dull gunmental color? Same part number for USDM and JDM.

 

Dull gunmetal colour describes titanium, chrome sounds more like steel? Maybe the Ti ones got too expensive to make for Honda and during the production run they swapped to steel? Another factor might be, in Europe anyway, imported from Japan examples were almost guaranteed to lose the gear **** in transit, to be replaced by other similar ones from Honda(Civic?) or aftermarket that looked the same.

 

I've got one with a light bronze colour, I prefer it over the other colours. I just changed to the USDM all leather **** though so the metal JDM **** is up for sale.

 

 

All the stock ***** I've seen in USDM ITR's that weren't the leather had the chrome appearance and not the titanium.

MAYBE the JDM one was titanium to match the e-brake release button and the USDM was chrome to match the same.