Hello,

At a crossroads with my turbo project here. I am posting this as a feeler before actually selling any parts, but looking to see interest in what I have and how quickly everything could go. Everything listed is brand new in box, and I could provide receipts if needed. Post or PM with interest in any of the following. Pictures to come.

-Precision 5431E - T3 .63 A/R 5 bolt Ford style flange EWG - cost $775 new
-Go-Autoworks ramhorn manifold, downpipe, and dump tube - T3, 2 bolt 38mm, 5 bolt Ford, 2.5" - cost $960 new
-Tial 38mm F38 EWG - cost $240 new
-Walbro 255 fuel pump with kit for EF/CRX - cost
-Synchrotech L3 ('88-'91 Si) MFactory LSD transmission with carbon synchronizers - cost $1500 new
-Innovative Mounts D-series (red bushings 75A) 3 mount EF/CRX motor/transmission mounts - cost $
-Innovative Mounts EF/CRX crossmember/traction bar - cost $
-RC 750cc saturated Injectors with B/D series fuel rail o-rings and B/D series clips - direct fit - not new but cleaned and serviced by RC - unused since
-D16Z6 shortblock machined .020" over, decked, honed, ready for boost with 8.8:1 Wiseco forged pistons, Eagle H-beam rods, Clevite bearings,notched girdle (all torqued and machined) - asking $500
-Freshly rebuilt D16Z6 head with a 5 angle valve job- stock cam, springs, retainer, VTEC solenoid included. OEM valve guide seals- valve lash set- ready to bolt on - asking $250
-Much more..

Odds and ends from new distributors to AN hose and fittings. EF/CRX intercooler charge piping and fuel pressure regulators. Basically a genuinely complete kit to have a boosted car minus the tune. Will cut a deal with someone who buys everything as a whole. Great chance to get everything in one shot, brand new at a discount. PayPal preferred. Will accept wire transfers, cash, and certain vehicular trades. No checks, money orders.

Post or PM. Will post pictures tomorrow, January 19th, 2017. I finally have the parts back in my possession and am looking to sell quickly. Thanks in advance.

 

I could use the Walbro 255 and the ef d series mounts. What are the prices?

 

I could also use intercooler piping, down pipe, oil lines if you have them.

 

Pictures attached. (484) 538-3336 Text please

Edit: Mods, I have attempted to upload the pictures several times and they do not load. I have submitted a tech support request with the site admin. Whenever I go to post, the text box is filled with advertisements and I cannot type. The only way I'm able to type is in the source code. This is not my browser. I've tried on several devices- it's on the account. Please assist me in getting this fixed..

I have all the pictures with Honda-Tech, my username and date listed in my CL ad, but I don't think the site rules permit linking to CL.

 

sent pm and text

 

Pm'd

 

Possibly interested in the head, depending on what shipping would be to Detroit. Might also be in Lansdale in a couple weeks for local pickup.

 

Give me a call or text. I'll check shipping if you give me a zip or address.

Block sold locally to cityofcaterpillars. Enjoy. If a mod could assist me with removing this messaging block, I can still only type in the source code and not standard messaging. It's preventing me from posting pictures.
(484) 538-3336 text/call

 

Was interested in that shortblock and some other odds and ends. I was talking with you through email a bit then didn't hear from you. thought you may have sold everything. I sent you my number through email if you have anything left get in touch with me. Thanks

 

How much for the injectors? Thanks.

 

I could use whatever is highlighted in yellow above your thread. Do you have that?

 

Pm sent.