D-Series turbo parts, Precision 5431E, Tial, Go-Autoworks, Hondata S300 V3 & More!
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2011
Location: Allentown, PA
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
D-Series turbo parts, Precision 5431E, Tial, Go-Autoworks & More!
Hello,
At a crossroads with my turbo project here. I am posting this as a feeler before actually selling any parts, but looking to see interest in what I have and how quickly everything could go. Everything listed is brand new in box, and I could provide receipts if needed. Post or PM with interest in any of the following. Pictures to come.
-Precision 5431E - T3 .63 A/R 5 bolt Ford style flange EWG - cost $775 new
-Go-Autoworks ramhorn manifold, downpipe, and dump tube - T3, 2 bolt 38mm, 5 bolt Ford, 2.5" - cost $960 new
-Tial 38mm F38 EWG - cost $240 new
-Walbro 255 fuel pump with kit for EF/CRX - cost
-Synchrotech L3 ('88-'91 Si) MFactory LSD transmission with carbon synchronizers - cost $1500 new
-Innovative Mounts D-series (red bushings 75A) 3 mount EF/CRX motor/transmission mounts - cost $
-Innovative Mounts EF/CRX crossmember/traction bar - cost $
-RC 750cc saturated Injectors with B/D series fuel rail o-rings and B/D series clips - direct fit - not new but cleaned and serviced by RC - unused since
-D16Z6 shortblock machined .020" over, decked, honed, ready for boost with 8.8:1 Wiseco forged pistons, Eagle H-beam rods, Clevite bearings,notched girdle (all torqued and machined) - asking $500
-Freshly rebuilt D16Z6 head with a 5 angle valve job- stock cam, springs, retainer, VTEC solenoid included. OEM valve guide seals- valve lash set- ready to bolt on - asking $250
-Much more..
Odds and ends from new distributors to AN hose and fittings. EF/CRX intercooler charge piping and fuel pressure regulators. Basically a genuinely complete kit to have a boosted car minus the tune. Will cut a deal with someone who buys everything as a whole. Great chance to get everything in one shot, brand new at a discount. PayPal preferred. Will accept wire transfers, cash, and certain vehicular trades. No checks, money orders.
Post or PM. Will post pictures once available. Thanks in advance.
At a crossroads with my turbo project here. I am posting this as a feeler before actually selling any parts, but looking to see interest in what I have and how quickly everything could go. Everything listed is brand new in box, and I could provide receipts if needed. Post or PM with interest in any of the following. Pictures to come.
-Precision 5431E - T3 .63 A/R 5 bolt Ford style flange EWG - cost $775 new
-Go-Autoworks ramhorn manifold, downpipe, and dump tube - T3, 2 bolt 38mm, 5 bolt Ford, 2.5" - cost $960 new
-Tial 38mm F38 EWG - cost $240 new
-Walbro 255 fuel pump with kit for EF/CRX - cost
-Synchrotech L3 ('88-'91 Si) MFactory LSD transmission with carbon synchronizers - cost $1500 new
-Innovative Mounts D-series (red bushings 75A) 3 mount EF/CRX motor/transmission mounts - cost $
-Innovative Mounts EF/CRX crossmember/traction bar - cost $
-RC 750cc saturated Injectors with B/D series fuel rail o-rings and B/D series clips - direct fit - not new but cleaned and serviced by RC - unused since
-D16Z6 shortblock machined .020" over, decked, honed, ready for boost with 8.8:1 Wiseco forged pistons, Eagle H-beam rods, Clevite bearings,notched girdle (all torqued and machined) - asking $500
-Freshly rebuilt D16Z6 head with a 5 angle valve job- stock cam, springs, retainer, VTEC solenoid included. OEM valve guide seals- valve lash set- ready to bolt on - asking $250
-Much more..
Odds and ends from new distributors to AN hose and fittings. EF/CRX intercooler charge piping and fuel pressure regulators. Basically a genuinely complete kit to have a boosted car minus the tune. Will cut a deal with someone who buys everything as a whole. Great chance to get everything in one shot, brand new at a discount. PayPal preferred. Will accept wire transfers, cash, and certain vehicular trades. No checks, money orders.
Post or PM. Will post pictures once available. Thanks in advance.
Last edited by bergercurtis; 09-29-2016 at 10:13 AM.
#2
Honda-Tech Member
Thread Starter
Join Date: Sep 2011
Location: Allentown, PA
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Re: D-Series turbo parts, Precision 5431E, Tial, Go-Autoworks, Hondata S300 V3 & More
Just the three most requested items.. I will have more time to do everything else this weekend. Apologies for the delay in pictures. I don't have the parts readily available at my house- they are stored at a friends shop where I was set to do the build.
Other parts I'll be listing:
D16 Cometic bottom end gasket kit
D16 ACT HC5-HDSS Clutch kit and ACT flywheel
D16 Skunk2 Pro-Series II Intake manifold and throttle body
Last edited by bergercurtis; 09-16-2016 at 01:36 PM.
#3
Honda-Tech Member
Join Date: Apr 2009
Location: Dirty ass Jersey
Posts: 131
Likes: 0
Received 0 Likes
on
0 Posts
Re: D-Series turbo parts, Precision 5431E, Tial, Go-Autoworks, Hondata S300 V3 & More
Location
Just the three most requested items.. I will have more time to do everything else this weekend. Apologies for the delay in pictures. I don't have the parts readily available at my house- they are stored at a friends shop where I was set to do the build.
Other parts I'll be listing:
D16 Cometic bottom end gasket kit
D16 ACT HC5-HDSS Clutch kit and ACT flywheel
D16 Skunk2 Pro-Series II Intake manifold and throttle body
Just the three most requested items.. I will have more time to do everything else this weekend. Apologies for the delay in pictures. I don't have the parts readily available at my house- they are stored at a friends shop where I was set to do the build.
Other parts I'll be listing:
D16 Cometic bottom end gasket kit
D16 ACT HC5-HDSS Clutch kit and ACT flywheel
D16 Skunk2 Pro-Series II Intake manifold and throttle body
#7
Trending Topics
#9
Honda-Tech Member
Thread Starter
Join Date: Sep 2011
Location: Allentown, PA
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post