Switch from Crome to Neptune

Reply Subscribe

Thread Tools

Search this Thread

Apr 7, 2015 | 06:38 AM

mdrouillard1983

Thread Starter

Honda-Tech Member

Joined: Mar 2014

Posts: 90

Likes: 0

Switch from Crome to Neptune

Hey I have a question, right now I have a chipped P28, running Crome with datalogging.

My question is, if I get the Neptune RTP do I have to make further hardware changes to my ECU or will the Neptune RTP circuit board pretty much plug right in?

Apr 8, 2015 | 11:32 AM

0HAMOTORSPORTS

Joined: Apr 2007

Posts: 11,314

Likes: 2

From: Big Sky Country, United States of America

Re: Switch from Crome to Neptune

The Neptune RTP/Demon board will plug directly into your ECU if it is socketed with a standard 28 pin machined socket and 4 pin datalog header.

Here's the install instructions for the Demon board so you can see it step-by-step:

Moates Demon Installation Instructions for USDM OBD1 ECU's

If your ECU is socketed appropriately as shown in the above instructions, then all you need is the Demon board and Neptune license: Demon V2 with Neptune RTP License Package