Everything is OBO, most prices are decently firm
NO TRADES. Only thing I will even think about are LS1 parts
Located in Kalamazoo, MI area

B16a turbo / turbo kit / suspension for EG / DC

B16a 1,750$

81.5 mm bore (.020 overbore)
.002 off block / .002 off head
.004 PTW clearance
All mains .0016-.0020
All rods .0015-.0018
Top ring gaps .018
Bottom gap .024

Head- B16A

Integra GSR cams
Skunk2 adj cam gears
Supertech turbo dual valve springs
Supertech std intake valves
Supertech exhaust valves
Supertech titanium retainers / keepers
97integra type r intake manifold and throttle body
Hondata IM gasket

Block- B16A

Manley H-beam rods
CP 10.5:1 pistons
ACL race bearings ( used mostly standard sizes but rods 2 and 3 required ACL oversize bearings)
ARP 2000 rod bolts
ARP head studs
Cometic .030 head gasket
Baffled oil pan
Fidanza 8.8 flywheel and ARP flywheel bolts

Also including all OEM b16 valve train and internals

Turbo kit 1,450$

Garrett 57 trim t3/t4 63 A/R turbo
SLS topmount manifold - heat wrapped
PTP lava turbo blanket
Tial 38mm wastegate V-band
Tial Q BoV
Fastturbo.com oil feed line / return kit
3 inch down pipe
3 inch J pipe included to fix small dent in the DP
2.5 inch intercooler piping and all clamps
Unknown FMIC

Suspension stuff / others

Complete 114.3 JDM Integra Type R 4 lug swap with OEM Type R wheels 650$
GSR trans 4.4 final drive and OEM type R diff with ACT 6 puck and pressure plate - 950$
Koni / GC sleeves / GC tophats 12k/9k- 850$
Omni rear LCA with brand new Blox replacement bushings- ***sold***
Goodwrich braided lines - ***** sold *****
Driveshaft Shop 2.9 axles-600$
Hondata s300 - 600$
Victor X B16 / ITR intake manifold - **** sold ****
ID 1000 cc injectors - ****sold****
ASR subframe brace and Stock ITR swaybar - 240$
DC5 buddy club seat slider dr side-make offer
EG / DC corbeau dr side seat slider - make offer
Carsound 2.5 ' high flow cat - make offer
Kteller 3' stainless steel mandrel bent exhaust - 250$



















Almost everything is brand new or mounted once and test fit then removed. I never finished this because I bought an S14.

 

Prices are OBO, no one wants any of this?

 

Would you sell just the turbo blanket ?

 

These prices are OBO. I realize pre purchased parts aren't 401k's. Please don't low ball though, all this stuff is brand new and listed lower than what you can find it retail.

Throw some offers and let's get this stuff a new home!


I'd like to keep the turbo kit as complete as possible. Right now I won't be parting stuff out but If the kit / motor don't sell soonish I'll separate.

 

Victor X sold


ttt

 

Interested in the Id 1000. Shoot me a text 608-609-3994

 

Sorry for the slow response. Sent you a text.
Been very busy preparing for WMHM!

 

Bump for a great seller! Very fast in shipping! Would do business again, Jump on this guys.

 

Payment sent for id 1000.

 

Received the payment for the injectors. They will be shipped out in about an hour. I'll pm you tracking info.

Thanks guys!

 

Price on the ASR sub frame brace and sway bar? what will it fit?

 

ASR brace will fit EG / DC.

It was installed to test fit end links and then removed. It'll come with...
ASR brace
All the ASR hardware
Stock 22 mm ITR swaybar and bushings
NO ENDLINKS

240 picked up

 

Thanks again for the injectors. Crazy fast shipping and easy guy to deal with. Appreciate it.

 

No problem. Thanks guys. Replying to all the PMs. I was very busy last week / weekend.

ttt