I have 95 auto accord just put a used transmission and new torque converter in it. It shifts fine but tried two starters and neither disengage after starting and clue what could be wrong? Thanks

 

Help anyone?

 

Have you tried the starter while out of the car? Make sure bendix kicks in and out, and it spins? Make sure bendix isnt stuck out?

 

I'll try that tomorrow but what of it's not working what do you do? I don't think that would be the problem with two starters?? But what could it be the wrong torque converter? I don't see how cause it shifts fine...

 

Did you swap the drive plate ? Does the tranny have the same transmission code ? What car is it from ? You may need the starter from the car that you pulled the tranny from.

 

No didn't swap the drive plate Trans came from exact same car I kept the starter on the Trans when I got it from the car tried it and my old one both do the same thing and codes are the same also..

 

double check that that torque converter is the correct one for your car ... i hope it was installed properly

 

Yeah I had a shop do the labor I guess IM going to pull it myself and compare it to the old torque converter