Decided to go a different route with my project...
These are all BRAND SPANKING NEW and have never been run.

Here's the break down:

- H22A1 Bare Block (Closed-Deck)
- Iron Sleeves installed by Leitner & Bush in Toronto, Canada (90mm Bore)
- Endyn/Wiseco Rollerwave Pistons 90mm, 9.6 - 1 Compression
- Pistons are Thermal and Anti-Friction coated by Endyn
- Pistons Rings
- New Cometics 90mm H22A headgasket

Block was assembled but has never been installed in a car. Everything is absolutely MINT. Rings are gapped and ready to go install

Paid $723 for pistons alone ($485 + $78 rings + $160 two coatings)
Paid $700 for iron sleeves
Paid $75 for headgasket

Will let go for $1250 FIRM...
<U>i will cover half of the shipping costs</U>. So basically you'll save about $250 and you get a free block!

 

ttt